If you use an auxiliary miter-gauge fence for mitering, beveling and dadoing, you eventually wind up with big chunks missing. Build this adjustable fence and you'll never cut the face - regardless of the blade or the angle of the cut.

Advertisement
3Tablesaw

Most auxiliary fences that bolt to a miter gauge eventually start to look pretty ragged. If you use one for mitering, beveling, dadoing, and such, you eventually wind up with big chunks missing.

This adjustable fence, though, slides toward or away from the blade so that you never cut the face-regardless of the blade or the angle of the cut. You also can fabricate different slides for zero-clearance cuts.

To build any of the three fences at right, cut the fence and clamp bar to the dimensions shown. For length, use whatever dimension suits your needs. Choose maple or another smooth, stable hardwood. Then, glue the two pieces of hardboard to the fence. Now, use epoxy to secure two #10 nuts in the clamp bar. Attach the clamp bar to your miter gauge. Slide the fence on the clamp bar, and position it. Finally, secure the fence in position by tightening the two screws.
Jerry Boone, Kansas City, Mo