Biscuits Strengthen Even Narrow Face Frames

While making a face frame for a bathroom base cabinet recently, I felt like mortise-and-tenon joints were overkill and half laps were too time-consuming. I wanted to use my biscuit joiner, but the face frame was too narrow to accept standard-size biscuits.

Instead of cutting biscuit slots in the edges of the frame parts, as I normally would, I cut a pair of them in the back face across each joint as shown above. After gluing the biscuits in place and letting the glue dry, I cut the protruding half of the biscuits off with a handsaw. (They won't be seen on the inside of the cabinet anyway.)

You wouldn't want to use this method for joints that will be under a lot of stress. Nor would you use it where the back of the frame will be visible. But for face frames, the joint produced is quick, easy, square, and plenty strong.
—Len Estrada, Gladstone, Va.