Stone-cold sharp: We test three categories of sharpening stones to find the best for putting a keen edge on your tools.
Sharpening Stones

Sharpening stones remain our tried-and-true favorite sharpening medium for most hand-tool blades. They're easy to use, require only human power, and sell for reasonable prices. But how do you know which stones to choose? We tested a variety of waterstones, ceramic waterstones, and diamond stones—11 sets ranging from 125-grit to 8,000 (more than two dozen stones in all)—to find the best fit for you. We flattened the stones that needed it, then sharpened chisels and plane irons, measuring the time it took for each as well as how much these stones dished out.

honing guides

Above: To ensure accurate, consistent results, we tested the stones using identical plane irons, always held in honing guides. See our review of several honing guides.

Waterstones: Effective and Affordable

▪ Waterstones typically consist of abrasive aluminum-oxide or silicon-carbide particles mixed with a binder that is heated and pressed into a rectangular block. The waterstones we tested cut slower than diamond stones, but about the same as ceramic waterstones.

▪ Waterstones wear quickly, exposing fresh grit to cut the steel. But because they're softer, they also flatten more easily than other stones. (See examples of fast- and slow-wearing stones lower.)

This King waterstone combines 1,000- and 6,000-grit abrasives in one stone and comes with a handy holder.
This King waterstone combines 1,000- and 6,000-grit abrasives in one stone and comes with a handy holder.

▪ Waterstores are the most affordable option. Two-sided stones, above, save even more.

▪ Waterstones must soak for at least 15 minutes before use, a delay not required by other types we tested. Allowing wet stones to freeze or letting fine-grit stones (4,000 and up) soak long-term can cause them to break apart.

▪ Periodically dribble a little water on the stone during use to help it cut better and clear the slurry, known as swarf. These stones tend to be the messiest.

Ceramics: less water, less wear

▪ Ceramic waterstones use similar ceramic particles, but are heated to a higher temperature than waterstones. We found that ceramics sharpen at about the same rate as most waterstones, lower, but wear at a much slower rate. Although you can find these as solid stones, most are bonded onto a glass or aluminum substrate to reduce the amount of ceramic material (to lower the price) and maintain flatness. Substrates do leave the backs of the stones slick, so plan to use a holder or grippy mat when sharpening.

▪ Ceramic stones sell for about 50 percent more than comparable waterstones, and some cost the same as diamond stones.

Use a spray bottle to spritz the face of a ceramic stone. Apply more water as swarf thickens.
Use a spray bottle to spritz the face of a ceramic stone. Apply more water as swarf thickens.

▪ Ceramics are ready to use immediately. Instead of soaking them in a water bath, just sprinkle or spray water onto them during use, as shown above.

▪ Ceramics require less cleanup after sharpening: Just rinse and wipe dry.

Diamonds are a woodworker's friend, too

▪ Diamond stones consist of tiny particles bonded onto a steel or aluminum plate. This ensures flatness and makes the "stone" less break-prone if dropped.

▪ In our testing, diamond stones cut the quickest of all types for both shaping and initial honing. But because they come only in grits from 120 to 1,200, you'll need to supplement them with waterstones or ceramic stones of finer grits for final honing, making diamond stones the costliest option (for half the process).

▪ Whereas waterstones and ceramics are designed to wear away to reveal fresh abrasive, diamond proves less friable (easily broken down). Its hardness, combined with a rigid bond on the metal plate, means these stones don't require flattening. You can even use a diamond stone to flatten waterstones and ceramics.

▪ As with the other stones, diamond stones require lubrication during use. While some call for proprietary lubricants, we found that water worked just as well. Be sure to rinse and wipe the stones when finished and allow them to dry thoroughly to prevent rust from forming on stones with steel plates.

▪ Diamond stones with empty spaces or patterns allow for swarf to gather and run off the surface during use. Solid-surface diamond stones, such as the Ultra Sharp and DMT Dia-Sharp, don't do this. In our testing, we did not find a significant performance advantage for either style.

▪ Reducing abrasive with patterning reduces cost, and two-sided stones, such as the DMT DuoSharp in extra coarse/coarse (220/325 grit) add to that value by doubling the grits. By comparison, the single-sided DMT Dia-Sharp in extra-extra coarse (120 grit) costs the same because it fully coats a single surface in diamonds.

The M.Power double-sided diamond stone includes a pump bottle of synthetic lubricant. The stone’s hollow plate reduces weight and cost.
The M.Power double-sided diamond stone includes a pump bottle of synthetic lubricant. The stone's hollow plate reduces weight and cost.
Diamond Stones cut fastest

Don't get in a groove: Flatten your stones

Waterstones and ceramic stones wear by design as the abrasive and binder break down to expose fresh abrasive particles. This keeps the stones working, but also means the stones dish out. So, you need to flatten these stones to prevent your tool edges from mimicking this dished-out shape. (Diamond stones, with their particle-on-metal construction, don't need flattening.)

hand holding a sharping stone.
After sharpening a chisel on all stones, we flattened each stone with a coarse diamond stone.

We used a diamond stone to flatten dished stones, above, but you could also use a dedicated flattening stone.

To measure the dishing that occurs with each stone, we sharpened a 3/4"-wide chisel with a honing guide to equal sharpness on each stone. After cleaning away the swarf, we sprayed each stone with black guide coat—a product used in automotive body work to reveal imperfections when sanding.

image of two shapening stones
The softer Naniwa waterstone (left) dished out the most (black area), while the harder Shapton ceramic stones barely dished out.

Then we made five flattening strokes on each stone, which revealed the extent of the dishing by the coating that remained, as shown above.

Get sharp, stay sharp with these winning stones

We appreciate very sharp tools, but we want sharpening to happen fast. That's why, based on our tests, we prefer fast-cutting diamond stones for shaping and durable ceramic stones for honing. We couldn't pick just one Top Tool, though, because we recommend you get stones in four grit ranges: You'll want 220-325 for initial shaping and 1,000-1,200 for follow-up. Choose a 3,000-4,000 stone for initial honing and a 6,000-8,000 stone for final honing. Because we had virtual ties in our results, we named two Top Tools in each of these ranges.


Top 4 sharpening stones
A: DMT DIA-SHARP Extra-coarse (220-grit) diamond stone, no. D8X, B: DMT DUOSHARP E, C: SHAPTON 4,000-grit glass ceramic stone, no. 834943 D: NANO HONE 6-micron (3,000-grit) ceramic stone

Extra Coarse

A: DMT DIA-SHARP Extra-coarse (220-grit) diamond stone, no. D8X

B: DMT DUO SHARP Extra coarse/coarse (220/325) combination diamond stone,no. W8CXNB


DMT DIA-SHARP Extra-fine (1,200-grit) diamond stone, no. D8E

DMT DUOSHARP Fine/extra-fine (600/1,200) diamond stone, no. W8EFNB



C: SHAPTON 4,000-grit glass ceramic stone, no. 834943

D: NANO HONE 6-micron (3,000-grit) ceramic stone

Extra Fine

SHAPTON 8,000-grit glassceramic stone, no. 834945

NANO HONE 2-micron (6,000-grit) ceramic stone

top value sharpening stones

If you're working with a limited budget, consider the Top Value Norton combination waterstones, above, in 220/1,000 and 4,000/8,000 grits. You get both in a kit with a flattening stone and plastic storage cases.

Where to get the Stones we tested


▪ Naniwa 220, 1,000, and 6,000, Sharpening Supplies,

▪ Norton 220/1,000 and 4,000/8,000, Peachtree Woodworking,

▪ Pride 220/1,000 and 6,000/10,000, Woodcraft,

▪ King 250/1,000, 1,000/6,000, and 1,200/8,000, Woodcraft,

Ceramic waterstones

▪ Nano Hone 70-micron/200-grit, 15-micron/1,000, 6-micron/3,000, 2-micron/6,000, Nano Hone,

▪ Shapton glass 220, 1,000, 4,000, and 8,000, Woodcraft,

Diamond stones

▪ DMT DuoSharp extra coarse (220)/coarse (325) and fine (600)/extra fine (1,200), DMT,

▪ DMT Dia-Sharp extra-extra coarse (120), extra coarse (220) , and extra fine (1,200), DMT

▪ M.Power 300/1,200 ($120), M.Power,

▪Trend 300/1,000, Woodcraft,

▪ Ultra Sharp coarse (300), Best Sharpening Stones,