You are here

2018 Wood Magazine INNOV8 AWARDS

1 of 9

The winners

We honor these eight new tools and accessories as the most innovative in the field of woodworking.

2 of 9

Super-compact 12-volt router

Although battery-powered routers have been around for years, they’ve all run on bulky 18-volt or larger battery packs. Bosch’s new compact router uses a single 12-volt pack to power the offset spindle and 14 " collet. It has a larger base than most trim routers, but weighs just over 2 pounds.

12-volt palm router


no. GKF12V-25N, $150 (bare tool)
Bosch
877-267-2499, boschtools.com

3 of 9

Perfect slots are only a click away

Unlike traditional adjustable slot cutters that use shims to fine-tune slots to precisely fit a mating workpiece, Infinity’s Precision Twist bits do the job mechanically. Simply rotate the adjuster knob one “click” to adjust slot width .004". Each bit features a top and bottom cutter with an adjustment range up to 14 " and a bearing that limits the depth of cut to 12 ".

Precision Twist slot-cutting bits

1814 ", no. 61-512, $140; 1414 ", no. 61-513, $140;
2-pc. set, no. 00-512, $250 
Infinity Cutting Tools
877-872-2487, infinitytools.com

4 of 9

Fine-tune miters at any angle

A shop-made shooting board and hand plane work great to trim miters to a single precise angle. But the head of Lee Valley’s new shooting board locks at any angle, with detents at 0°, 18°, 22.5°, 25.7°, 30°, 36°, 45°, and 60°. The board comes with everything except the plane and an auxiliary wood fence that you provide. Your shooting plane rides on a UHMW track, with an adjustable rail to prevent the plane from pushing away from the workpiece. (Remove this rail to use a regular bench plane.) You can also buy just the fence/head and make your own shooting board.

Veritas adjustable shooting board

no. 05P54.90 (right hand) or 05P54.91 (left hand), $199;
fence alone, no. 05P54.85, $109
Lee Valley
800-871-8158, leevalley.com

5 of 9

Clamping force gets more compact 

Bessey’s new GearKlamps look and work similarly to traditional F-style clamps, but without the handle extending from the sliding jaw. Instead, the in-line handle rotates around the bar for easy access in tight spaces, and four gears (inset photo) transfer clamping force to the padded jaw. Bessey says these clamps can produce up to 450 pounds of clamping force.

GearKlamp

6" (GK15) $16; 12" (GK30) $20; 18" (GK45) $23; and 24" (GK60) $25
Bessey Tools
800-828-1004, besseytools.com

6 of 9

Cutting tools now “talk” to the vacuum

Makita’s new Autostart Wireless System (AWS) uses Bluetooth technology to link a shop vacuum/dust extractor with likewise equipped cordless sliding mitersaws, rail-guided saw, and concrete rotary hammers. Simply sync the tool and vacuum, and then every time you activate the tool’s trigger, it automatically powers up the vac as well. These machines and the vacuum run on two 18-volt LXT battery packs, so you don’t need any electric cords.

Autostart Wireless System

Dust extractor, no. XCV08Z, $460; 10" sliding compound mitersaw, no. XSL04ZU, $515 (bare tool); 612 " plunge-cut saw, no. XPS02ZU, $360 (bare tool)
Makita
800-462-5482, makitatools.com

7 of 9

Powermatic thinks outside the box for air cleaner

The innovation here comes from the pleated electrostatic filter, which the company claims traps dust as fine as .1 micron—an incredible accomplishment compared to other air-filtration systems that claim 1-micron filtration. The fan runs at a whisper-quiet level, so you’ll be more likely to leave it running all the time. The cover screen and filter can both be removed and cleaned when needed.

Micro-Dust air-filtration system

no. PM1250, $700
Powermatic
800-274-6848, powermatic.com

8 of 9

Muffler quiets the ’clone

Noise remains the biggest objection to keeping a dust collector running all the time you’re in the shop. Oneida’s new stacking sound filter installs in-line with the cartridge filter of many of its cyclone collectors, reducing the noise output by 6–7 decibels, according to Oneida, without adding to the machine’s footprint.

Stacking sound filter

13" diameter, no. BSS131400, $199;
18" diameter, no. BSS181600, $229
Oneida Air Systems
800-732-4065, oneida-air.com

9 of 9

Get zero-measure accuracy without the cost of a rail-mount saw

Unless you own a rail-guided plunge saw, you typically have to factor in the offset measurement between the blade and the edge of the circ saw’s base when guiding it with a straightedge. With the cordless ExacTrack circular saw, you simply clamp your straightedge on the cutline, rest the base’s red portion on the straightedge, press the blade against the edge, and cut precisely on the mark. The base works with any straightedge up to 34" thick.

ExacTrack 20-volt 612 " circular saw

bare tool, no. WX530L.9, $100;
with one 2.0 Ah battery and charger, no. WX530L, $120
Worx
855-279-0505, worx.com

Read more about

Tip of the Day

Just flip and rip with this thin-strip tip

As I was making the thin-strip ripping guide from the November 2008 issue of WOOD®... read more