You are here

Jet 5HP Industrial Shaper



This heavy-duty JET Shaper is available with a powerful 5HP, 1Ph motor with magnetic controls. The four-speed (4000, 6000, 8000, 10000 RPM) step pulley drive with quick release lever allows you to select the best speed and torque for different cutter diameters. The spindle is reversible, and receives maximum power transfer from the v-belt. The independently adjustable fences have micro adjust controls for precise positioning.
Four-speeds 4000, 6000, 8000, 10000 RPM let you select the best speed and torque for different cutter diameters
Powerful 3HP, 1Ph, 5HP, 1Ph or 5HP, 3Ph motor with magnetic controls
Independently adjustable left and right fences, standard with a micro adjust control for precise positioning
Large 26-3/4" X 32-1/4" precision ground cast iron table provides a durable work area, predrilled for power feeder
Poly-V-belt transfers maximum power to the spindle
Starting Pins for irregular shaping
Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
Extra-large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments
Reversible spindle speeds for diverse shaping jobs
4" Dust port built into fence for convenient hookup to any dust collection system
Spindle lock for safe and easy cutter set-up
Spindle height scale

Model Number JWS-35X5-1
Brand Jet
Height 41"
Width 40"
Length 30"
Net Weight 473 lbs
Spindle Speed 4000, 6000, 8000,
and 10000 RPM
Reversible Yes
Spindle Diameter 1-1/4"
Spindle Travel 4"
Table Size 26-3/4" x 32-1/4"
Table Height from Floor 33-1/4"
Table T-Slot 3/4" x 3/8"
Table Opening Diameter 6-19/64"
Table Insert Opening Diameter 2-9/16" and 4-5/16"
Fence Size (L x H) 4-3/4" x 16"
Fence Travel (Major/Minor) 4" and 1"
Table Inserts 2
Max. Diameter Cutter Below Table 6"
Max. Diameter Cutter Above Table 7-1/2"
Router Bit Collet Diameter 1/4" and 1/2"
Dust Port Outside Diameter 4"
Dust Collection Min. CFM Required 400 cu.ft/min
Electrical Controls - Magnetic Starter Yes
Motor Power 5 HP
Motor Voltage 230 V
Prewired Voltage 230 V
Motor Current 17 A
Motor Phase 1 Ph

Tip of the Day

At-a-glance grinder gauge

Here’s a simple way to reset your grinder’s tool rest to the correct angle. After adjusting the... read more