You are here

Craftsman Professional 10" Tablesaw #21829

Average reader rating
out of 5


The Craftsman 15 amp 10" Portable Table Saw includes a superior action, easy-folding stand for storage and effortless mobility. With sliding front and rear rails, and an oversized miter fence, this table saw allows its user to make smoother and more accurate cross-cuts.
Includes: Miter Saw, Carbide Tipped Blade, Push Stick, Guarding system, Anti-kickback Pawls, Hex Keys, Miter gauge, Rip fence, Miter Table Fence, Router Table Guarding and Fence Components, Stand and Operator's Manual
Sliding miter table and router table can be lifted and moved for proper placement when adjusting rails
On-board storage for cord, blades, rip fence, miter gauge push stick and sliding miter table to keep work area organized
Large 8 in. wheels for superior maneuverability around worksite or jobsite
2-1/2" dust port for easy hook-up to wet/dry vacs to keep work area clean
1/32" scale on rails for precise measurements
Modular Guard System assembles tool free to the machine for ease of use and added versatility
Dado Capable design accepts up to a 13/16" wide 6" dado stack
Cast-Aluminum Tabletop provides a solid and durable surface for accurate cuts
Die cast miter gauge with positive stops makes finding and changing to common miter angles quick and easy
Weight: 126 lbs
Power: 15 Amps
Setup: Some Assembly May Be Required
Warranty: Craftsman One Year Limited
Left Rip Capacity: 30 in.
Right Rip Capacity: 33 in.
Amps: 15.0
Height: 36 in.
Width (in.): 32 in.

Reader Reviews

OK saw

Review Summary

This table saw is great if you have limited room and have to break it down to store. BUT every time you set it up again, you must "zero" in your fence and miter. I could not use my Rockwell wobble dado head cutter. It would not fit inside the underside blade pan. Also the throat plate is difficult to duplicate in a zero clearance unit. Sawdust evacuation is marginal at best.
I have my Sears Shopvac connected to it and dust still escapes out the throat plate. Best I can get the fence aligned is .010" and the same for the miter guage. . . FRUSTRATING. Not a good enough saw for building cabinets or other close tolerance work. Positives are that it does make a good overall portable table saw and at 15 amps, most garage circuits will handle it.

Detailed Ratings

out of 5





Ease of Use




Tip of the Day

Mini trammel for mini circles

I recently completed a project that required several 6" holes. I quickly discovered the 3" radius... read more