Infinity 10" x 60 Tooth Fine General Purpose Blade

Average reader rating
out of 5
Infinity Cutting Tools


The ideal Radial Arm Saw or Table Saw Blade, this General Purpose Saw Blade is perfect for all-around table saw or radial arm saw use.

The micro-grain carbide teeth are set with a 5° positive hook and feature a high 30° alternate top bevel so they provide very clean cuts in any cross-cut or ripping application.

Every saw blade is given our exclusive Nickel Armor™ coating. This tough and durable Nickel coating extends the life of your blade by preventing rust and eliminating pitch and resin build-up.

Reader Reviews

Fine Crosscuts and General Purpose Versatility In One Blade

Review Summary

This is an amazingly clean cutting blade that happens to have very good versatility too. The Hi-ATB teeth are exceptional for crosscutting, but it also rips very cleanly in material to ~ 5/4”. It’ll excel in fine veneered plywood, melamine, hardwood, softwood, or other laminates, plus is versatile enough to be used for general purpose work for most common thicknesses.
It’s cleaner cutting than my Forrest WWII, Ridge Carbide, Tenryu, DW7657, and Infinity Combomax, though it doesn’t rip as aggressively. It’s appropriate for just about any saw that’ll take a 10” blade with 5/8” bore…table saw, CMS, SCMS, or RAS. Infinity lists the 010-060 as a general purpose blade suitable for table saw and radial arm saw use, but with 60 teeth, it could just as easily be listed as a crosscut blade. It features large C-4 micrograin carbide teeth with a 30° Hi-ATB grind with a slightly positive hook of +5°. The Infinity’s 5° positive hook is suitably low to allow for safe use on a RAS or SCMS without issue, and is very desirable in a TS. It has a kerf width of 0.104” which registers on the thicker side of most thin kerf blades. After all was said and done, the Infinity 60 tooth 010-060 was impressive on many fronts, and was really a pleasure to use. It’s remarkably well made, as are any other Infinity products I’ve encountered. There’s really a fine line between versatility and optimal performance within a given cutting range….it’s pretty much impossible to achieve the best of both because they’re opposing performance characteristics. As versatility increases, the blades performance at each cutting extreme decreases. The 010-060 offers slightly less versatility than a blade like the 40T WWII or TS2000, but it rewards that loss with a taste of the performance achieved by a fine task specific crosscut blade yet retains enough versatility to be left in place for other tasks. I’ve had the opportunity to try over 60 high end saw blades in the past few years....very few leave such a strong impression as this one. It’ll take an 80T purebred crosscut blade to yield a cleaner cut, but the differences in cut quality are likely to be minor, plus you’d be giving up the versatility the 010-060 offers. It’s not exactly suitable for a “one blade does all” situation, but it gets close, and will do a fine job of a lot of tasks. It’s also a super compliment to a good 24 tooth ripper, or even a blade like the 30T Forrest WWII. This is just a beautifully made high performance precision blade with some unique abilities that very few blades offer

Detailed Ratings

out of 5





Ease of Use




Tip of the Day

Smaller Hole Makes Glue Refills Spill-Free

Every time I tried to refill my small glue bottle from a gallon jug, I wound up spilling glue. The... read more