Delta Benchtop Oscillating Spindle Sander #SA350K

Brand:
Delta
Model:
SA350K
Price:
$200

Description

The SA350K includes 1/4 HP, 1 Phase Motor, cast-iron table with 4 1/2 in. long x 3/4 in., 1 in., 1 1/2 in., 2 in. and 3 in. rubber spindles, drum plates, abrasive sleeves and table inserts, dust bag, 3/16 in. Allen Wrench, 1/2 in. socket wrench. 3/4 in. spindle converts to 1/2 in. when rubber drum is removed.

Large, cast-iron table measures 18 in. diameter to support large work pieces
Heavy-duty motor assembly features a powerful, 1/4 HP induction motor with direct drive for quiet, smooth operation. Replaceable oil-impregnated bearings and sturdy, ground-steel rods for support
Built-in dust collection fan draws in dust and chips through a specially designed table insert and deposits debris in the standard-equipment dust bag
Pre-drilled base holes for mounting sander to a stand or workbench
Toggle switch with removable lock out key prevents unauthorized use
Comes complete with table insert for accepting standard-equipment 3/4 in. diameter sanding drum and sleeve. Four accessory table inserts are also available for using sanding drums from 1 in. - 3 in. in diameter
Two built-in compartments make it easy to store accessory sanding drums and sleeves
Remove the rubber 3/4 in. drum for the 1
CSA Listed
Motor: 1/4 HP, 120V, 1 Phase, 60 Hz, 1,725 RPM Stroke: 7/8 in.
Strokes/Min: 60 SPM Drum Size: Minimum: 3/4 in.; Maximum: 3 in. (1/2 in. with rubber drum removed from 3/4 in.)
Spindle Diameter: 1/2 in. Spindle Length: 4 1/2 in.
Speed: 1,725 RPM Table Size: 18 in.
Table Insert: 4 in. Dust Collection Outlet: 1 1/2 in.
Height: 15 in. Length: 18 in.
Width: 18 in. Weight: 45 lbs.
Shipping Weight: 55 lbs.

Tip of the Day

Dirt-cheap dust collection

Here’s an inexpensive way to improve dust-collection effectiveness on your bandsaw. Use a small... read more