You are here

Hitachi 10" job-site tablesaw with stand

Average reader rating
out of 5


    The C10RJ 10" Jobsite Table Saw features a 15-Amp motor with 4,500 RPMs, and is engineered for rip-sawing and cross-cutting of ordinary wood, hardwood, plywood and composite wood materials. The fold & roll stand is designed with sturdy legs for easy set up and breakdown, providing stability while in use. The stand also incorporates wheels to ensure the user can maneuver through tough terrain with ease. The C10RJ features soft start, an electric brake and a large working table size with telescoping table extension that can support a max rip capacity of 35" to the right. Capable of a 3-1/8" cut at 90 degrees and 2-1/4" cut at 45 degrees, this user-friendly table saw is an ideal choice for any workshop or jobsite.

    • Direct drive universal 15 Amp motor produces 4,500 RPM to power through the toughest ripping applications 
    • Soft start function reduces noise and recoil at start-up
    • Electric brake halts the rotation of the blade within seconds for added safety
    • 10" 40-Tooth carbide tipped blade included for high cutting capacity
    • Bevel range of 0 degree to 45 degrees for cuts ranging from 3-1/8" (at 0 degree) to 2-1/4" (at 45 degrees)
    • 28-3/4" x 22" working table top with out feed support of 28-3/4" x 2" for easy and stable material support
    • Telescoping table extension supports 35" of ripping capacity to the right and 22" to the left 
    • Both the bevel scale and bevel height adjustment knobs for the blade are situation on the front of the cabinet for easy access and viewing
    • Equipped with a 3/4" T-slot miter gauge that features a large scale with adjustable positive stops at 0, 15, 30, 45 and 60 degrees to the left and right to help guide material accurately for a truer cut
    • On-tool accessory storage allows for easy access to needed items and convenient storage while not in use
    • 8 x 13/16" Dado capacity allows for simple dado cuts
    • Easy adjustments for blade height or angle, as well as simple fence adjustments to adhere to the cutting material
    • Stable and durable fold & roll stand for easy set up and breakdown, providing stability while in use
    • Large 8" rubber, all-terrain treaded wheels that ensure the end user can maneuver the saw to/from and around the jobsite with ease and convenience
    • Overload protection automatically shuts off the motor in a possible current overload situation to help prevent damage to the saw
    • Riving knife ensures cutting material does not bind and/or kick-back during operation
    • Oversized power switch with emergency off safety cover is designed at knee level for immediate shut down as an added safety feature
    • Dust  port located at the rear of the base measures 2-1/2" and can connect to a shop vac or dust collection system for a cleaner work environment     
    • Covered by Hitachi's 2-Year Limited Warranty


    • 10" 40-Tooth Carbide Tipped Blade  (371495)
    • Blade Guard Assembly  (371647)
    • Anti-kickback Pawl Assembly  (371648)
    • Miter Gauge Assembly  (371651)
    • Push Stick  (371532)
    • Rip Fence Assembly  (371649)
    • Outfeed Support Assembly  (371650)
    • (2) Blade Wrenches  (371633)    
    • 5mm Hex Bar Wrench  (371644)    
    • 4mm Hex Bar Wrench  (371645)
    • 2.5mm Hex Bar Wrench  (371646)

    Blade Size



    15 Amp 120V - 60Hz

    No-Load Speed

    4,500 RPM

    Blade Type Included

    40T Carbide Tipped

    Table Material


    Working Table Size

    28-3/4" x 22"

    Outfeed Support Size

    28-3/4" x 2"

    Max Rip Capacity Right


    Max Rip Capacity Left


    Max Cut Depth @ 0 Degrees


    Max Cut Depth @ 45 Degrees


    Max Width of Dado

    8 x 13/16"

    Soft Start


    Electric Brake


    Dust Port Size


    Fold & Roll Stand


    Tool Weight (Assembled)

    96 lbs



    Reader Reviews

    Fence Problems

    Review Summary

    The problem is the fence, hard to set 90 degrees. What holds the fence at 90 is plastic on plastic and wears and does not hold well so cuts can be off.

    Detailed Ratings

    out of 5





    Ease of Use




    Tip of the Day

    A curtain call for finishing small parts

    Finding a place to keep small parts while they dry can leave you in a real quandary. Screw... read more