Shop Fox 6" Jointer

WOOD magazine rating
Shop Fox


The oversized fence on this 6" jointer provides tremendous control for edge-jointing wider boards. The fine-adjust handwheel dials in the outfeed table relative to the cutterhead top dead center and the lever adjusted infeed table provides quick and accurate infeed table movement. Top it all off with a built-in mobile base, and you've got a jointer that has it all!

• Motor: 1 HP, 110V, single-phase
• Maximum stock width: 6"
• Maximum depth of cut: 1/8"
• Maximum rabbeting capacity: 1/2"
• Cutterhead diameter: 2.5"
• Knives: 3 (HSS) 6" x 5/8" x 1/8"
• Cutterhead speed: 4,800 RPM
• Table size: 6" x 46"
• Table height from floor: 32.5"
• Cuts per minute: 14,400
• Fence size: 5" x 35"
• Fence adjustment: positive stops @ 45° & 90°
• Overall dimensions: 46" x 27.5" x 37.25"
• Approximate shipping weight: 270 lbs.

WOOD magazine review

Mobile base, but needs power boost

Review Summary

With a long, tall fence with two handles, pedestal-mounted power switch, smooth fence and table adjustments, and a built-in mobile base, you’d think this jointer has it all. But it lacks power, and we had to force the fence to its back-most position to get a full 6"-wide cut. Jointed surfaces also require more sanding than most others in the 10-jointer test.

Detailed Ratings

out of 5





Ease of Use




Tip of the Day

An off-the-wall tablesaw safety reminder

We all know that it’s good safety practice to unplug your tablesaw before changing the blade. But... read more