Festool HL 850 Planer

Using an electric planer right up to the edge or on rabbets often produces unsatisfactory results, as the machine leaves a lip that has to be removed by hand—unless you have the Festool HL 850 planer. The HL 850 lets you cut flush to an adjacent surface because it can plane across the entire width of the rabbet. Because the planer head is mounted to one side, it sits flush with the opposite side of the planer housing. The retractable side guard makes planing safer, and it swings up and to the side as the rabbet depth increases. Planing up to the edge in deep rabbets is no longer a problem.

Single knife cutter-head with spiral design with replaceable cutting knife for a smooth, quiet and “chatter-free” cut.
Multiple head options to create rustic architectural effects in beams and flooring.
Unlimited rabbeting depth with flush cutter side design and retractable spring-loaded guard.
Rotary handle depth adjustment allows precise depth setting to 1/256" (1/10 mm) up to 9/64" (3.5 mm).

Cutting depth 0 - 9/64" (0 - 3.5 mm)
Drive shaft speed 10,000 rpm
Head width 3 15/64" (82 mm)
Noise level at idle 79 dB (A)
Power consumption 850 watts / 7 amp 120 volts AC
Rabbeting depth Unlimited
Weight 8.6 lbs.