General Finishes High Performance Topcoat
This is one of the hardest, most durable consumer polyurethane top coats on the market today. It is non-yellowing and offers easy water clean-up. It contains all the consumer-friendly characteristics of PolyAcrylic Blend. In addition, it contains a UV Stabilizer to protect it from breaking down in sunlight and to protect the underlying stains from fading. With its pure polyurethane durability, it's a great choice for hardwood floors.
Dry Time: normally 2-4 hours under ideal conditions (70°, 70% humidity). Cooler temperatures and higher humidity will prolong drying time up to 8-10 hours.
Clean up with warm, soapy water
Coverage: 75 sq. ft./pint; 150 sq. ft./quart; 600 sq. ft./gallon.
Thinning: If necessary, thin with 10-20% water.
Direction for use:
Oil based stains must be completely dry before using a water based top coat. Wait a minimum of 48 hours before applying GF High Performance.
Use a foam brush or paint pad applicator. Apply liberally using smooth, even strokes going with the grain. Use enough material to provide a wet film.
Sand between coats using 320 or 400 grit sandpaper. Remove dust before recoating.
A minimum of 3 coats is recommended. Additional coats may be applied to increase durability and depth.
In addition it contains a UV Stabilizer to protect it from breaking down in sunlight and to protect the underlying stains from fading. And with its pure polyurethane durability, it can even be used on floors. This is the most durable product. Available in the following sheens, Flat, Satin, Semi-Gloss and Gloss.
Tip of the Day
Simple subbase spaces shelf holes equally
Many shelf-pin hole jigs consist of a long board with a line of holes drilled into them:... read more