General Finishes Enduro-Var Urethane Varnish

General Finishes
Enduro-Var Urethane Varnish


Enduro-Var is a self crosslinking polyurethane that looks more like an oil varnish than a water coating. It ambers slightly, is our most durable coating, is highly water resistant, and is both sprayable and brushable. It is our top of the line coating and should be used when you need the very best. Suitable for floors, cabinets and millwork. Available in Flat, Satin, Semi-gloss and Gloss.

Bringing you the best of both water- and oil -based finishes, this advanced self-crosslinking top-coat combines the easy clean-up and fast dry times of a water-based finish with the warm amber hue of an oil-based finish. Its air-oxidizing curing process makes it extremely rugged, plenty strong for even hardwood floors. It is VOC-compliant, low-odor, non-flammable and cleans up with soap and water. Dries tack-free in only 10-30 minutes, and can be recoated in 2-4 hours. Brush, roll or spray on. Available in Satin, Semi-Gloss or Gloss.

Features and specifications:
Slight amber hue looks more like an oil-based varnish than a water-based finish.
Very durable.
Highly water resistant.
Can be used over most water-based and solvent-based stains.
Oil-based stains should dry a minimum of 48 hours before applying Enduro-Var.
Dries tack-free in 10-30 minutes.
Recoat after 2-4 hours.
Enduro-Var is self sealing. Do not use over other sealers or topcoats without consulting with General Finishes for compatibility.

Tip of the Day

Sled slices skinny strips safely

Ripping thin strips on a tablesaw makes me nervous and sometimes the strip falls back into the... read more