Grizzly Dust Collector

WOOD magazine rating


• Grizzly canister filters have 6 times the filtering area of regular bags and have a built in cleaner
• Allows filtering of the air to 1 micron with minimal loss of performance
• Motor: 3 HP, 240V, single-phase
• Air suction capacity: 2320 CFM
• Newly designed 7" inlet has removable heavy-duty steel "Y" fitting with three 4" inlets
• 12.75" blower/impeller
• 16.9" static pressure
• 87dB sound rating
• 19 5/8" x 23 5/8" canister filter
• 41" lower bag length
• 11.4 cubic foot bag capacity
• 57 7/8" x 32" x 71"

WOOD magazine review

Good a collecting dust, not so much at filtering

Review Summary

The G0562Z moves dust nicely, but with the most leaks (of the nine dust collectors we tested head-to-head) around welds, connections, and bag rims, it also sent much of the fine dust back into the air. Despite pleated canister filters rated to trap particles as fine as 1 micron, the G0562Z allowed five times more dust to escape than the best-performing single-stage collector we tested, and about 15 times more than the best filtering cyclone.
However, it ranked third-best in airflow, overcoming 9" of static-pressure loss at 800 CFM, the minimum needed to power a small-shop duct network. At 1200 CFM it could still overcome 5" of SP loss, so this machine does a great job of collecting dust and chips and getting them into the bags/canisters. Made of the lightest-gauge steel among the group we tested, this machine displays more wobble than others when moving around the shop.

Detailed Ratings

out of 5





Ease of Use




Tip of the Day

Turn maple into ebony

Why maple? If your project needs a touch of the exotic that your budget can’t bear... read more