iVac Switch Box
The iVAC Switch Box is intended for use in on-site applications, where typically only 115Vac services are available. It removes the distraction of turning a dust collection system on and off while operating potentially dangerous power tools. This tool is intended to be used in conjunction with a dust collection, or vacuum system and an associated power tool.
The power tool can range from a high power table saw down to a low power drill; in fact most 115volt power tools that generate dust. From a safety aspect, the iVAC Switch Box avoids distraction, by automatically controlling the dust collection system, which it in turn reduces the hazard of airborne dust in the work area.
ETL Safety Approval
The iVAC Switch Box has received ETL safety approval.
Conforms to UL STD 244A and certified to CSA STDC22.2 No 14.
Three Modes of Operation
Auto – Off – On
Turn On Delay
This is the time delay from when the power tool is turned on to when the vacuum is turned on.
When a tool or vacuum is turned on, there is an initial power surge from the AC mains.
By means of the delay, it avoids the two power surges occurring at the same time and causing the AC mains circuit breaker to trip.
Turn Off Delay
The Turn Off delay of 6 seconds ensures that your work area continues to be cleared of remaining airborne debris even after the tool has stopped.
Two Input power cords
To permit operation from two separately protected AC mains circuits, when the combined power from the tool and the vacuum exceed 15 Amps.
Power Cord Protection
Both power cords are individually protected with 15 Amp circuit breakers.