You are here

24 " ProGrip clamp and tool guide

Average reader rating
4.8
out of 5
Brand:
ProGrip
Model:
24"
Price:
$30

Description

ProGrip Straight Edge Clamps are the perfect combination of clamp and edge guide. Think of it - instant accuracy for cross-cutting and routing up to 105"! Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw.

These guides are made from extruded aluminum for light weight and maximum durability.

The unique 2-3/16" wide tube rail construction keeps the ProGrip Clamps light and easy to use, yet more rigid than other similar clamps on the market.

Features include tape measure scales, low profile jaws (that never get in the way) and built in T-Track on the top side of the clamps permitting the use of any of our versatile accessories or shop made jigs.

Choose from Single, Back to Back or Side to Side clamps.

ProGrip Straight Edge Clamps are the perfect combination of clamp and edge guide. Think of it - instant accuracy for cross-cutting and routing up to 105"! Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw.

These guides are made from extruded aluminum for light weight and maximum durability.

The unique 2-3/16" wide tube rail construction keeps the ProGrip Clamps light and easy to use, yet more rigid than other similar clamps on the market.

Features include tape measure scales, low profile jaws (that never get in the way) and built in T-Track on the top side of the clamps permitting the use of any of our versatile accessories or shop made jigs.

Choose from Single, Back to Back or Side to Side clamps.

Reader Reviews

Clamp and straight edge

Review Summary

I found, at least for me, that these type clamps were the easiest to use when clamping a solid edge on plywood, since they lay flat on the piece and the clamping doesn't involve any turning of a clamp head which tends to move the edge around before the glue sets. The shallow clamping jaw is just the right size for this function.
I already have two of these from another manufacturer of similar quality, but when I discovered how convenient these were I purchased two more.These are solid and are of good quality. This Co. also sells a good many jigs and accessories for this tool that can be used in conjunction with the t-tracks on each side of the bar.These seem to be much better in quality than the ones I got from Harbor Freight and will probably hold up better under more use. The ones I recently purchased of this ProGrip brand were black in color and not the silver ones as shown in the picture posted here. They probably changed the color. The HF ones are flimsy by comparison and the rod underneath is a softer metal on the HF ones, which tend to make it more difficult to adjust over time,since the rods nick a little every time you clamp them. The HF ones are 1/3 the cost of these and can clamp at slight angles like on the Bora brand ones and have the deeper jaws, but for the application I'm using these for I prefer the shallower jaws on these ProGrip ones.

Detailed Ratings

4.8
out of 5

Performance

5

Features

5

Ease of Use

5

Value

4

Tip of the Day

The history of your shop as told by scrapwood

I enjoy using colorful, exotic woods to craft small woodworking projects. When I make a project... read more