Jigs and Fixtures

Small-parts Tablesaw Sled

Hold small parts securely, safely, and dead-square to the blade for clean and super-accurate cuts on your tablesaw.

Box-Joint Jig

Nothing beats the elegant simplicity of the box joint.

Right-angle brace gives you a corner on clamping tasks

Anytime you need to hold two large workpieces at a right angle, say while you're screwing or gluing them together, you need one or more of these plywood triangles.

Bandsaw Outfeed Table

With less than 8" of table behind the blade, most bandsaws lend little support to workpieces when

Perfect-cut Tablesaw Sled

Switch from cross-cutting to miters in seconds by dropping the miter plate into this dual-purpose

Pickup Truck Sheet-goods Rack

Smaller pickups have their advantages, but transporting 4x8' sheet goods isn't one of them.

Flattening Sled

Create flat faces on natural-edge slabs or boards too wide for your jointer or planer by using th

No-guesswork Dado Jig

Cutting a dado that precisely matches the thickness of the material going into it can be a time-c

Bench-mounted Router Table

Save the precious floor space you'd devote to a typical router table by making this model that cl

Tip of the Day

Clean up rust with a simple scraper

After buying a used and neglected tablesaw, I looked for a way to clean up the rust without... read more