Choosing The Right Abrasives

Coated Abrasives Coated abrasives include products made up of abrasive minerals bonded to a backing material with a glue or resin bonding agent. They come in sheets, disks, belts, drums, cords, cloth strips, and sponge-backed blocks for sanding contoured surfaces. Each form has its uses, but you also have to pick the right abrasive minerals and grit sizes to get the best results.

Your Abrasive Options You can choose from two natural minerals (flint and garnet) and three manufactured ones (aluminum oxide, silicon carbide, and zirconia alumina.) See your options in the chart on the next page.

Grit Sizes: Our Recommendations Grit number (or mesh number) refers to the particle size of the abrasive mineral, from 36 grit to 600 grit. However, the sanding products you'll most often use fall within the 60- to 220-grit range. When sanding bare wood prior to finishing, you don't need to work your way through the full range of grit sizes, especially if you use a power sander for some of the work.

To smooth a flat surface, such as a table top, we start with a sander equipped with an 80- or 100-grit aluminum-oxide belt, then switch to a finishing sander using 150- or 180-grit garnet paper. We finish up with 220-grit aluminum oxide paper.

Abrasives Chart

 chart.jpg

 

Read more about

Tip of the Day

Long arm lends hand when routing edges

You can't rout assembled box or drawer edges very well with a hand-held router, especially inside... read more