Table for Two

November 2019 Issue 264 Page: 44 Number of Pages: 6.00


A single table for two (or even three) routers conserves shop space, saves time, and improves efficiency. Plan is available in the WOOD Store.



• The dimensions for the laminate-trimmer insert opening in Drawing 3 should match the subbase's 4-1/8" x 5-1/4" dimensions in the note on page 47. • The bevel angle for the bit holders is missing from Drawing 2. The bevel angle is 15° • In Drawing 3, the 4-5/8” dimension for locating the miter slots should go to the far edge of the slots, not the near edge, when measured from the top (P) edge.