Add storage to stands

May 2010 Issue 197 Page: 22 Number of Pages: 2.00

This article is now available at the WOOD Store on USB Drive



Page 22 - Drawing 3: wire pull screw goes through parts J and K; part I width is 10-1/2" Page 24 - There is an error in Section 2 of customizing your own stand. For Step B, the difference in our example should be 1-1/4". As a result, the new length in Step D would be 11-3/4". Materials List: Part D width=16-1/2" and length=26-1/2"; Part E width=16-3/4" and length=12"; Part I width=10-1/2".