Follow us on Pinterest
Welcome, Guest! Log In  |  Join Now

Tool review: Deluxe 14-inch Bandsaws

Ranging from $770 to $1,495, these saws give you greater power and resaw capability than entry-level models.

Deluxe 14" Bandsaws

Deluxe 14" Bandsaws

Choosing to purchase a 14" deluxe bandsaw says a lot about where you are in your woodworking journey. You're ready to move to a machine capable of tackling all curve-cutting, ripping, crosscutting, and resawing tasks in even the thickest and hardest wood species. Thankfully, you don't have to jump to a pricey 18" or larger bandsaw to get these attributes. This class of 14" bandsaws--measured by wheel diameter--does it all.

Resawing test
Enlarge Image
Tool tester Bob Saunders feeds an
ash board through this bandsaw to
test its resawing power and accuracy.
Riser block
Enlarge Image
A riser-block kit comes with the block,
a connecting bolt, and extended blade
guards. It takes about 20 minutes to
What to look for first in a 14" bandsaw

Ample resawing capacity. Start your search by focusing on the widest board the saw can rip standing on edge. Get as much capacity as possible, because you'll never wish you had less. Having the ability to rip a wide board into thinner pieces opens up greater project options, such as bookmatched door panels or thin slabs laminated around a curved form. Resawing allows you to maximize the face (showing surface) of a prized piece of wood, such as spalted maple or quilted mahogany.

A one-piece steel frame found on three of the bandsaws in this test provides 10-14" of resaw capacity. On the other hand, three of the C-frame saws--which look like big cast-iron C-clamps on bases--resaw only 6" out of the crate. But if you install an optional riser block ($70-$120), shown at right, you'll double that capacity. Though a C-frame saw, the Jet JWBS-14DXPRO comes standard with 12" resaw capacity built into its column; no need for a riser block. The C-frame Powermatic includes the riser-block kit as standard equipment.

Plenty of power. Cutting curves or ripping stock up to 2" thick won't challenge the power of any 14" bandsaw. But when you resaw--especially hardwoods 10" or wider--you need power in spades. For this, look at two factors. First, the motor should be rated at least 1 hp, but go bigger if your budget and shop's electrical capacity can handle it. (Bandsaws powered by 110-volt motors top out at 1 1/2 hp; anything greater requires a 220-volt circuit.) In our testing, the 3-hp Laguna 14SUV dominated the power showdown.

The second power factor: the wheels that drive the blade. Cast-iron wheels outperform aluminum ones because their greater weight generates more momentum to power the blade through a cut. This weight also dampens vibration, resulting in greater accuracy and cut quality. Of the tested saws, all but the Delta have cast-iron wheels.

Continued on page 2:  More things to look for


Comments (2)
fcoppage wrote:

I've owned the Jet 14DXPRO since it came out. MSRP $1195, Street price $800. Wired to 220 I haven't had anything I've thrown at it bog it down, which includes some 10" oak, 8" walnut and 6" maple. Yes, I had to get a fence as an option but that worked out fine because I was then able to get the Kreg BandSaw fence which I find more superior than any 'stock' fence. All in all I think you overlooked something here somewhere.

5/14/2015 04:19:45 PM Report Abuse
GeorgeBjelovuk wrote:

Does anyone have a source for the riser blocks for a Delta 14" bandsaw, Model 28-280?

5/21/2014 04:33:52 PM Report Abuse

Add your comment

You must be logged in to leave a comment. Register | Log In

Please confirm your comment by answering the question below and clicking "Submit Comment."


Connect With Us
  • Recent Posts
  • Top Posts
See More >