You are here

FREE Woodworking Charts

Download these great charts for use in your shop.


To view the charts on your screen, and print them using your printer, you must have Adobe Acrobat Reader version 4.0 (or greater) installed on your computer. The good news is it's free for you to download, and you only have to download it once! For answers to frequently asked questions, click below.

To learn how to download the current FREE downloadable charts to your computer please read print out and follow our Step-By-Step Instructions for downloading .pdf documents.

If you know how to download and install software, please

Drill Press Speed Chart

If you're like most woodworkers, you have at one time or another ruined an expensive drill bit or cutter by running it at too high a speed in your drill press. So how do you go about finding out the recommended operating speed for any given tool so this doesn't happen? Up until now, it's been almost impossible!

Wood Screw Chart

What's there to know about screws, except that you never seem to have enough of the right kind when you need them? Our downloadable chart references the gauge, head-bore size, shank-hole size, pilot-hole size and available lengths of traditional wood screws and production screws.


Lumber Sizing Chart

Easy board foot calculation
Hardwoods sell in grades by the board foot, a basic unit of measurement that equals a 1"-thick board that's 12" wide and 12" long. That's because hardwoods--unlike softwoods-aren't cut and milled as dressed, sized lumber in standard nominal dimensions (2X4, 1X6, 4X4, etc.) to only be cut to length for construction. Instead, mills saw hardwoods into random widths and lengths to best take advantage of the clear wood in a log. Hardwoods do come in nominal thicknesses, such as 1", 1-1/4", etc. (often referred to as four-quarter, five-quarter, and so on), that actually are a bit shy of the stated thickness. Therefore, you'll pay for a 1"-thick measurement but actually be getting about 3/16" less. Board widths aren't standardized. Typically, the dealer will "round up"; to the next inch of width and charge you for it. To help you in estimating stock and cost for the projects you want to build, download the chart using the link below that gives you the amount of board feet in a range of common hardwood dimensions you'll likely come across where you shop for wood.


Decimal and Millimeter Equivalents

Use this chart to convert fractions to metric or decimal values. Measurement conversions start at 1/64" and end at 64/64" (1"). We encourage you to print and hang this in your shop.

Glue Chart

Guide to choosing and using woodworking glues

Decimals conversion chart

Router lifts and dial indicators often show measurements in thousandths of an inch (.001"), but woodworkers tend to think in fractions, not decimals. Click below to download a handy fractions-to-decimals conversion chart to keep by your router table and tablesaw.


Q: What is Adobe Acrobat Reader?
Adobe Acrobat Reader is a computer program that reads our chart and allows you to display and print the information on your particular computer. Adobe Acrobat produces a file type (.pdf) that is compatible with most all computer types, including IBM compatibles using Windows 3.1 and Windows 95, as well as Apple Macintosh with a 68020 or greater processor, or Power Macintosh. You will need to install Adobe Acrobat Reader v.3.0 on your computer to view and print your charts.

Q: Do I have to install Adobe Acrobat Reader on my computer?
Most new computers are shipped with Adobe Acrobat Reader already installed. Since so many files are now being offered on the internet in Adobe Acrobat format, you'll be able to use this program for many other applicatons. If you don't have Adobe Acrobat Reader v.3.0 installed on your computer, don't worry. It is easy to install, and it is free to download from Adobe. Remember, you only have to install Adobe Acrobat Reader once to be able to use your charts. The instructions for downloading this program is linked from the FREE Charts Page.

Q: Do I need any special fonts installed on my computer?
No, we've embedded all the fonts required for the plans within the Adobe Acrobat file.

Q: Are the drawings, photos and text all in the same file?
Yes. No need to have several programs open at once to use the charts. The pages that appear on your computer screen are just like those found on the pages of WOOD magazine. Note: The downloadable plan typically uses a few more pages than the magazine. This is because we've enlarged most of the drawings to make them easier to read on your printed out version.

Q: Will the drawings print clearly using my inexpensive printer?
Yes. They should print fine using most dot matrix, inkjet, and laser printers. We’ve made the drawings as large as possible, typically filling up the entire 8.5 x 11" page.

Q: Can I use the charts offline?
Yes. The file is downloaded onto your hard drive or floppy disk to be used whenever or as many times as you like.


My printer won't print the text
Try setting the print quality at normal or economy rather than best quality or reduce dpi to 150 rather than 300 dpi. These settings are selected in the printer setup or printer options.

Patterns are not printing full size
Make sure your printer is set to print at 100% and that "print to fit" is not checked. These settings are selected in the printer setup or printer options.

HP printers
Make sure you are using the latest printer drivers. Printer drivers are available from Hewlett Packard's web site: Printer driver installation instructions are also available at their web site.

I can't save file after it downloads
Adobe Acrobat does not have a save function. You must save the file when you download the file. Download the file again, except this time try right-clicking on the download button or link to plan file. A menu window will open. Select "Save target as" or "Save link as" to save the file to your hard drive. Once saved, you can open it with Adobe Acrobat Reader.

Download is interrupted, I can't get the file.
Turn off your screen saver and try again. Check your online service time-out settings, they may need to be increased or disabled.

Read more about

Tip of the Day

Extend the Scope of Your Tablesaw

Extend Tablesaw

When making repetitive tablesaw crosscuts, you typically clamp a stop on a miter-gauge auxiliary... read more