Help

Magazine Changes and Updates

Share
Print
Comments (18)

Pages in this Story:

Issues 101-150

WOOD MAGAZINE CHANGES / UPDATES Issue 101-150
ISSUE #	ISSUE MO / YR	PAGE #	ARTICLE	CORRECTION / ADDITION
101	December 1997	57	Portable Base (lathe)	Bill of Materials: Part B thickness is 1/2"
101	December 1997	63	Fabulous Fireplace Surround	Buying Guide: Change The Woodworkers' Store to Rockler Woodworking and Hardware, same phone number
101	December 1997	84	Nativity Scene	Sheep, Manger, and Donkey: 1" stock; remainder 1 1/2" stock
102	Winter 1997	8	Talking Back	Homemade knob for tenoning jig: illustration 1 3/8" should be 1 5/8".
102	Winter 1997	8	Talking Back	Homemade knob for tenoning jig: illustration 1 3/8" should be 1 5/8".
102	Winter 1997	58	Full-Service Workbench	Bill of Materials: part P and Q width should be 4 1/2 not 5 1/4"
102	Winter 1997	58	Full-Service Workbench	Buying Guide Vise: Part no. 126504. New address: 1177 Rosemar Road, P.O. Box 1686, Parkersburg, WV 26102
102	Winter 1997	60	Full-Service Workbench	Drawer illustration, left side: Q should be 4 1/2" not 5 1/4"
102	Winter 1997	65	Wet-Wheel Grinder	Buying Guide: Hardware kit is no longer available.
102	Winter 1997	84	Super-Simple Taper Jig	Buying Guide Hardware Kit is no longer available.
103	February 1998	30	Tips From Your Shop (And Ours)	Swing-out rack, top section view: pegboard should be perforated hardboard.
103	February 1998	43	Pendulum Clock	Step 2: dowel (E) not (F)
104	March 1998	45	Swivel-Topped Tool Cabinet	Step 8: use locking swivel and fixed casters
104	March 1998	46	Swivel-Topped Tool Cabinet	Supplies: use 2–2 1/2" locking swivel casters
104	March 1998	47	Swivel-Topped Tool Cabinet	Exploded View: 2 1/2" locking swivel caster
104	March 1998	57	Compound Mitersaws	Caution: Always be sure that the plate that covers the arbor screw is securely held in place by the rubber washer and screw. See Talking Back issue 110, December 1998, p. 8
104	March 1998	68	Entertainment center	Buying Guide, Hinges. 170 degree overlay Modul hinges, part 00B0401, available from Lee Valley 800-871-8158 or leevalley.com
104	March 1998	69	Entertainment center	Panel Mounting Detail illustration: sheet metal screw not wood screw
105	April 1998	16	Ask WOOD (Ni-Cad batteries)	How to dispose of them see Talking Back, issue 116, August 1999, page 6
105	April 1998	47	Patio Chair	Address for WOOD Magazine Plans, PO Box 349, Kalona, IA 52247, or call 888-636-4478, or online at woodstore.woodmall.com
105	April 1998	63	Computer Center	Bill of Materials: Part II, 13" width not 13 1/4"
105	April 1998	63	Computer Center	Hardware source, new address: Rockler Woodworking and Hardware, 800/279-4441 or www.rockler.com
105	April 1998	66	Computer Center	Drawer Cabinet and Drawers illustration: part CC front side should be 3/4" rabbet 1/4" deep
105	April 1998	77	Windchime	Chimes made of 3/8" diameter aluminum rod, available at hardware stores and home centers. The lengths are: 7-1/2", 6-7/8", 6-1/2", 5-15/16", 5-5/8", 5-5/16", 4-7/8", 4-5/8"
105	April 1998	78	Music in the Wind	Buying Guide, tuned chime rods, are no longer available.
105	April 1998	81	Adjustable Square	Exploded View, part B: the hole size for the brass threaded insert may vary for some inserts.
106	June 1998	43	Patio Planter/Table	Bill of Materials for the Planter not Table
106	June 1998	45	Patio Planter/Table	Address for WOOD Magazine Plans, PO Box 349, Kalona, IA 52247, or call 888-636-4478, or online at woodstore.woodmall.com
106	June 1998	47	Bird Bath	Note: glue needs to be water resistant
106	June 1998	68	Keepsake Box	Forming the Lid Profile and Forming the Base Profile illustrations: 3/16" cove bit not round-over bit.
106	June 1998	68	Keepsake Box	Illustration for Cut 4: 3/16" should be 1/8".
107	August 1998	43	Nautical Knickknack (shelf)	Buying Guide: Hardwood kit, call for current price. Finished boat and brochure no longer available. Visit Jim Shotwell's website at jimshotwellboats.com.
107	August 1998	57	Scrollsawn Basket	Pattern Pack for parts C and E: the centerline needs to be moved up 1/8" to go through the middle of the beads.
107	August 1998	94	Saw-Top Dust Collector	Illustration: labels for 3/8" and 3/4" screws switched
108	October 1998	8	Climb Cutting	How Climb-Cutting Give Smoother Results: Shape of bit should be round not oval
108	October 1998	46	Box-Joint Jig	Adjustment Assembly: Part I 13/32" hole should be 1" from the end, not 2" as shown.
108	October 1998	46	Box-Joint Jig	Buying Guide: Hardware kit and Easy-to-assemble kit are no longer available.
108	October 1998	47	Box-Joint Jig	Cutting Diagram: by shortening the length of pieces A, C, and D from 26" to 23-7/8", and rearranging the cutting diagram, it is possible to get two complete sets of pieces with indexing blocks from a 24x48" piece of plywood.
108	October 1998	50	It's a Keeper (magazine box)	See Sounding Board, issue 156, June/July 2004, page 10, new dimensions to accommodate increase in WOOD magazine size
108	October 1998	52	Nightstand	Glue up the sides, step 1, page 54 not page xx; step 2, page 54, not page xx.
108	October 1998	54	Nightstand	Buying Guide: Mission-style small pull 2-3/4x1-3/4 inches, no. 01G62.70, available from Lee Valley, 800-871-8158 or leevalley.com
108	October 1998	67	Entertainment Extravaganza	Buying Guide: Overlay carrier strip should be Inset carrier strip. Parts update: Rockler slides no. 35571; strip and hinges no. 35663. Use crown molding bit of choice. MLCS bit #870 is no longer available.
108	October 1998	71	Entertainment Extravaganza	Exploded View: parts C front-left corner are not notched as illustrated.
108	October 1998	71	Entertainment Extravaganza	Bill of Materials: Part C, L = 17 1/4" not 17 3/4".
108	October 1998	82	Drafting/Reference Center	Self-closing hinge should be 12" not 14". Available from: Woodworker's Hardware (#KV8080 PEZ12) 800/383-0130. Arrow for 1/4x3/4x15 1/2 maple goes to front edge of board for a band. New Buying Guide for 4-position multiuse bracket (3/03) is now Woodworker's Hardware (800/383-0130) #KV0206 ZC 12.
109	November 1998	10	Workbench Tool Crib	End Detail: 3/8" hole should be 1 3/4" from edge
109	November 1998	45	Resawing	Illustration BLADE GUIDE 1 5/8" should be 2 3/8"
109	November 1998	70	Noah's Ark	Buying guide Ark animals: New address Roesner's Miniature, Menagerie, 425 Overlook Court, Geneseo, IL 61254, aminizoo.com, phone 563-565-3489, no fax or e-mail address available. Contact for current prices.
109	November 1998	80	Tilt-Top Router Table	The model 300 Incra jig originally used with this router table top is no longer available. To accommodate this, we designed a new fence to replace this jig. The revised instructions and drawings are available as downloadable plan (DP-00064) in the Shop Tools and Accessories section of the WOOD Store at woodstore.woodmall.com
110	December 1998	32	Ask WOOD	Illustration Face-Jointing: The tangential surface shrinks about twice as much as the radial surface. Lumber always cups to the bark side.
110	December 1998	55	Turning Back the Times	Source new addresses: Ornamental Turners International: Alan Bugbee, 37 Fox Den Road, West Simsbury, CT 06092; Society of Ornamental Turners, Secretary Nicholas S. Edwards, Kirklea, Park Road, Melchbourne, Bedfordshire, MK44 1BB, UK
110	December 1998	56	Steamer Trunk	Hardware. 4 bump glides, 02240624; 2 handles, 02263766; 4 handle loops with pegs, 02003428; 4 stop hinges, 02003522; 1 lift pull, 02264230; 2 draw bolts, 02240856; 2 trunk stays, 02003530. Call VanDyke's Restorers 800/787-3355 to order.
110	December 1998	Pattern	Five-Drawer Chest	Base: Part I, counterbore 2" from front not back
110	December 1998	68	Five-Drawer Chest	Buying Guide, hardware: Woodworkers' Store now Rockler Woodworking and Hardware
110	December 1998	68	Five-Drawer Chest	Buying Guide, turned feet: address changed to PO Box 728, Morristown, TN 37815
110	December 1998	69	Five-Drawer Chest	Cutting diagram duplicated from page 68. See issue 111, page 8, for the cutting diagram.
110	December 1998	72	Country Finish	Buying Guide: Zar products listed are no longer available. Use finish brand of own choice.
110	December 1998	83	Mobile bases	Detla's phone number 800/438-2486
111	Winter 1998	49	Bent-Laminated Hang-Ups	Buying Guide update: Call for current prices. In Canada call: 952/471-8550.
111	Winter 1998	64	Country-Fresh Dresser	Slot Detail: rabbet on part C not part A.
111	Winter 1998	65	County-Fresh Dresser	Buying Guide, turned feet: new address PO Box 728, Morristown, TN 37815
111	Winter 1998	67	Country-Fresh Dresser	Photo B, top row should be four part R, not R and P.
111	Winter 1998	77	Step right up	Base hypotenuse dimension is 9-13/16" not 8" as shown.
112	February 1999	47	Mesquite Magic	Update seminar, plans, and material information: Four-day seminars, available from www.mesquiterocker.com, Robert Hensarling, 4326 East Main Street, Uvalde, TX 78801.
112	February 1999	53	Morris Chair	Opening paragraph: We do not have a mail-order source for the cushions.
112	February 1999	54	Morris Chair	Photo A: phone is flopped. The handle should be on the right.
112	February 1999	55	Morris Chair	Plan WP-JG-1002, call 888-636-4478 or online at woodstore.woodmall.com
112	February 1999	58	Morris Chair	Drilling the pin holes: the pin-hole locator jig is not flush with the end of the arm, IMPORTANT to be flush with the backrest of the chair (see step 8)
112	February 1999	Pattern	Morris Chair	Part I (Armrest): see Talking Back issue 115, June 1999, page 8, for dimensions and delete the 3" dimension in the upper left hand corner of the template form.
112	February 1999	63	Now You're Cookin'	Buying Guide new address: Mike and Rox Duflo, 2555 20th Ave., Vero Beach, FL 32960-4145, www.woodduflo.com
112	February 1999	68	Oscillating Spindle Sanders	Grizzly MS-240 discountinued, replaced with G1173 at $150
112	February 1999	81, 82	Lathe Artistry	The thickness of the maple strips for the layer 11B laminations, shown on the last line of the first chart on page 81 should be 3/16" instead of the 1/8" listed. The pieces are shown also in the lamination on the right side in the Feature Ring Blanks illustration page 82. On drawing, change the 1/8" dimenions for the two light-colored strips to 3/16".
112	February 1999	83	Lathe Artistry	Buying Guide for wood kit is no longer available.
113	March 1999	26	Nightstand	Buying Guide, turned feet: new address PO Box 728, Morristown, TN 37815
113	March 1999	60	Bandsaw Multi-Jig	It is important that the angle of the trammel be 90° from the front edge of the blade.
113	March 1999	63	Bandsaw Multi-Jig	Parts View, Slot Detail: 1/4x1" slot should be 1/2x1" slot.
113	March 1999	68	Wood by the Yard	Caution regarding photo on page 68, always use wedges for splitting wood. See Talking Back, issue 116, August 1999, page 6.
113	March 1999	83	Shelf Clock	Clock Face illustration: 3/16" hole should be 5/16".
113	March 1999	83	Shelf Clock	Bill of Materials: Part E, 1/8" thickness is 1/16". Part G, 11" length is 12 1/4".
113	March 1999	85	Shelf Clock	Full-size clock hand patterns: Use a #10 drill bit for part F. Use 5/32" hole for part E. Cutting Diagram: part E 1/16" thick stock
114	April 1999	16	Panel-Cutting Sled	The 1" hole is for hanging the sled when not in use
114	April 1999	58	Stains	Olympic review in Talking Back, issue 119, December 1999, page 8.
114	April 1999	61	Stains	Valspar number is 800/323-5129
114	April 1999	66	Solid Oak Bed	Buying Guide, turned feet: new address PO Box 728, Morristown, TN 37815
114	April 1999	66	Solid Oak Bed	Exploded View: Part L 1 1/8 inch hole should be 7/8 inch deep
114	April 1999	75	The Great Cover-Up	Buying Guide new address: Constantine's Wood Center, 1040 E. Oakland Park Blvd., Ft. Lauderdale, FL 33334, 800/443-9667. Kit no. WDVK2 no longer available, order parts separately.
114	April 1999	75	Showy Keepsake Box	Buying Guide new address: Constantine's Wood Center, 1040 E. Oakland Park Blvd., Ft. Lauderdale, FL 33334, 800/443-9667. Kit no. WDVK1 no longer available, order parts separately.
115	June 1999	Pattern	Knockdown Sawhorses	Stretcher End: Align the upper angled cut, opposite the hanging hole, with the inside edge of the bottom notch
115	June 1999	43	A Crown Jewel (clock)	Mitersaw Table Section View: reverse part A, the rabbetted edge should be against the fence not the guide strip. (See Talking Back issue 117, October 1999, page 4.)
115	June 1999	43	A Crown Jewel (clock)	Buying Guide: Clock hardware kit is no longer available. Company is no longer in business.
115	June 1999	59	Sidewalk Speedster	Source for wheels: see issue 118 page 6
115	June 1999	59	Sidewalk Speedster	Body Side: lower left corner of illustration 1-1/16" should be 11/16".
115	June 1999	60	Sidewalk Speedster	Bill of Materials: Part P thickness should be 5/8" not 3/4". See issue 118 page 6.
115	June 1999	63	Sidewalk Speedster	Step 4: Krylon no. 1315 cherry red is now Krylon no. 2101 cherry red.
115	June 1999	65	Masterful Marking Gauge	Buying Guide parts are no longer available.
115	June 1999	Pattern	Folding Adirondack Chair	Seat Support (H), top of part F 30° bevel should read 40° bevel. Bottom of part F should be 20° bevel. Correct in other illustrations.
115	June 1999	72	Folding Adirondack Chair	Foot note: See Talking Back issue 118, page 8, for collapsible adjustment.
116	August 1999	Pattern	Casserole Carrier	Base should measure 16 1/4" not the 16 1/2" that it does measure.
116	August 1999	55	Arbor	Bill of Materials: The lattice stop widths are G=1"; H=1 3/8"; I=1 3/8"; J=1"; K=1 3/8"; L=1"
116	August 1999	64	Bookcase	Buying Guide, hardware update: Parts #123876 and #123872 no longer available. Use 2 Mission-style vertical door pulls, #01W32.12, LeeValley at leevalley.com or 800/871-8158. 3 dark antique finish left-handed lift-off hinges, #LO-8L, 3 dark antique finish right-handed lift-off hinges, #LO-7R, Horton Brasses Inc. at horton-brasses.com or 800/754-9172. Remaining hardware available through Woodcraft. Note: Original hinges used on the bookcase were no-mortise. These hinges must be mortised into the case and door.
116	August 1999	69	Bookcase	Door illustration: 2° bevel on inside edge of each door not outside edges. Arrow direction moves to the other side of door illustration. The dadoes in parts U and V should be 1/2" by 1/4" deep, not 1/4" dadoes 1/4" deep.
117	October 1999	46	Schoolhouse Clock	Bill of Materials and Parts View (pattern): Part K is 3/4" wide not 1" wide
117	October 1999	46	Schoolhouse Clock	Buying Guide: Spring wound movement no longer available; battery movement available
117	October 1999	47	Schoolhouse Clock	Exploded View: #8 x 3/4" F.H. wood screws (for mounting J to Ks)
117	October 1999	47	Schoolhouse Clock	Exploded View: Glue (H and I) to back side of (L) 3/16" from outside edge.
117	October 1999	Pattern	Schoolhouse Clock	Parts View: Part D length is 20 7/8" not 2 7/8".
117	October 1999	55	Stylized Bird	Stylized bird pattern missing from pattern insert. See issue 119, page 8 for pattern.
117	October 1999	70	Ironing-board hideaway	Buying Guide, hardware: Ironing board cover 130350 no longer available, see chain department stores; 1-1/4" brass knob part number changed to 130161
117	October 1999	85	Letter Box	Section View: Part E does not go to the top of Part A.
118	November 1999	44	Shop-Made Hardware	Part no. change: square file, catalog no. GRO-32-421 from Reid Tool Supply Co.
118	November 1999	48	Shop-Made Hardware	New source: green patina available at craft and art supply stores.
118	November 1999	48	Shop-Made Hardware	New phone number: Constantine's Wood Center, 800/443-9667.
118	November 1999	55	North-Country Windsors	Source e-mail: bob@bobdillonwindsorchairs.com
118	November 1999	59	Table lamp	Hardware kit is no longer available (September 2006)
118	November 1999	63	Tablesaw Accessories Cabinet	Buying Guide and Exploded View: Woodcraft's part numbers changed, swivel casters (2) 141050, fixed casters (2) 141053; 3" wire pulls (2) no. 836159.
118	November 1999	66	Portable Mitersaw Stands	Upgrades to Delta's and Stablemate's mitersaw stands. See Talking Back issue 119, December 1999, page 8.
118	November 1999	82	Big Rig	Bill of Materials: Part C should be 6" width, 7 3/8" length
118	November 1999	86	Nutcracker	See Talking Back, Issue 125, August 2000, page 12, for tip on cutting grooves on ends of parts A and B.
118	November 1999	87	Nutcracker	Cutting Diagram: Brass sheet should be 1/16x2x15".
118	November 1999	87	Nutcracker	Buying Guide new address: Constantine's Wood Center, 1040 E. Oakland Park Blvd., Ft. Lauderdale, FL 33334, 800/443-9667
119	December 1999	53	Quilt Stand	End Panel: R=5" goes to edge of panel.
119	December 1999	55	Quilt Stand	Step 1: spacing between stopblock and guide blocks is 3/4" not 1/2"
119	December 1999	62	Mobile Mitersaw Center	Bill of Materials: Part Q is 13/16" thick. See Talking Back Issue 127, October 2000, page 8, for cutting diagram. Woodcraft's part numbers changed, swivel casters (2) 141050, fixed casters (2) 141053; 3" wire pulls (2) no. 836159.
119	December 1999	62 & 63	Mobile Mitersaw Center	Buying Guide and Exploded View: Woodcraft's part numbers changed, swivel casters (2) 141050, fixed casters (2) 141053
119	December 1999	63	Mobile Mitersaw Center	Front Section View drawing: hinge butts up to Part T. See Exploded View drawing (above).
119	December 1999	70	Drill-Press Dust Collector	See Talking Back, Issue 125, August 200, page 12, for reader suggestion.
119	December 1999	81	Wake-up Call	Buying Guide is no longer available, no other source
120	Winter 1999	50	Apothecary Cabinet	Step 2: Mark the screw-hole centerpoints and mark and drill the slots on the sides (A)...
120	Winter 1999	52	Apothecary Cabinet	Supplies: #8 x 1 1/4" pocket screws
120	Winter 1999	53	Apothecary Cabinet	Carcase Exploded View: #8 x 1 1/4" pocket-hole screw; *Note: Mounting slots and mounting holes in A, B, and C must be drilled before assembly.
120	Winter 1999	Pattern	Apothecary Cabinet	Parts View, pocket holes: 1" from each edge not 1 1/2"
120	Winter 1999	Pattern	Apothecary Cabinet	Part A: 15 3/4 is from top edge to second mounting slot
120	Winter 1999	61	Portable Planers	Photo of Jet JWP-12-4P shown in former blue color, tool now white and dropped the Shopline name. Unit still carried by JET.
120	Winter 1999	61	Portable Planers	Chart, Makita, Comments: carbide knives are not available.
120	Winter 1999	62	Writing Desk	For cutting diagram see Issue 124, June 2000, page 9, Talking Back
120	Winter 1999	63	Writing Desk	The Drawer Unit Mounting detail: When the drop leaf panel (Q) is closed, its outside surface is flush with the sloped edge of the side panels (C).
120	Winter 1999	64, 66	Writing Desk	Bill of Materials and Drawer illustration: Part N, length is 10 1/2" not 10 7/8"
120	Winter 1999	69	Photo Stand	Exploded View: 2 acrylic panels needed; Tenon Detail, groove vertical to panel
120	Winter 1999	71	Air-Cleaning System	Note: For access to the inside of the cabinet, replace the screws that fasten the side (E) on the pulley side of the blower with hanger bolts and wing nuts. Locate the switch or junction box in one of the other panels.
120	Winter 1999	73	Air-Cleaning System	Buying guide, blower/motor: Grainger changed the motor to stock no. 7D554, 1,280-1,587 cfm, new phone no. 888-361-8649 Note: The blower cabinet and filter cabinet are based on the particular model we used. Measure your blower and filter before beginning construction to make sure they will fit in the cabinets dimensioned here. Cabinet sizes may need to be adjusted for other models of blowers and filters.
121	February 2000	4	Online	Item shown in photo is the Dropleaf Workbench, plan DP-00057.
121	February 2000	31	Tips	Sweatband keeps corded tools from going cordless: for safety attach Velcro to the sweatband and the mating piece to the cord with glue or tape. See Talking Back, Issue 125, August 2000, page 12.
121	February 2000	46	Nesting Tables	Cutting Diagram in Talking Back, issue 124, June 2000, page 8.
121	February 2000	47	Nesting Tables	Exploded View, Medium Table: leg (A) width is 1 1/2"; part A 3/8" x 1 1/4" mortise 1" deep
121	February 2000	49	Nesting Tables	Mortise Detail, right rear leg: 9/16", 3/8", 9/16". See Talking Back, Issue 127, October 2000, page 8.
121	February 2000	51	Cold Frame	Bill of Materials: Part B, width should be 17 3/16". See Talking Back, Issue 124, June 2000, page 6.
121	February 2000	53	Traditional Rocker	Effective 1/31/03 the full-size patterns are $10.95. Write to: Traditional Rocker, PO Box 349, Kalona, IA 52247
121	February 2000	55	Traditional Rocker	Queen Anne Router Bit source: Infinity Cutting Tools, item 10-500, call 877-872-2487
122	March 2000	4	Online	Plan shown is no. DP-00014
122	March 2000	25	Hot Off The Internet	SAFETY NOTICE: Use caution when working with MEK and acetone. See Talking Back, Issue 126, September 2000, page 10.
122	March 2000	32	Ask WOOD	Voltage: See Talking Back, Issue 126, September 2000, page 8.
122	March 2000	34	Hints for Huge Holes	Safety Addition: see Talking Back 131, March 2001, page 10.
122	March 2000	57	Hall Table	Cutting Diagram: Poplar piece is 3/4x5 1/2x72" Cutting Diagram: Walnut, in order to achieve a continuous grain pattern across the front rails (C) and the drawer front (J), the parts should be cut in the sequence C-J-C. Flank the front rails with end rails (B). See Talking Back, 129, pg. 8.
122	March 2000	63	Gas Pump Clock	Front View: 5 3/4" to bottom edge of part D.
122	March 2000	71	Router Tables	Chart: Porter-Cable flatness rating is G. Woodhaven phone number is 319/785-0107. CMT's Industrio router-table available from Bench Dog, Inc., 800/786-8902.
122	March 2000	74	Dump Truck	Tip for filing wheel-tread notches by hand see Talking Back, Feb 2001, page 12.
122	March 2000	75	Dump Truck	Box illustration: Bottom edge of Part L is 4 1/2" not 6", see Box Parts View on page 124.
122	March 2000	85	Tray Tables	Supplies: Roto Hinges available through Rockler and Woodworker's Hardware
122	March 2000	86	Tray Tables	Tray Stand Exploded View: Part I measurement 13 1/4" between dadoes should be 11 3/4"
122	March 2000	87	Tray Tables	FRONT LEG illustration, part I: Center of end hole 7/8" from end not 3/4". Part L 3/8" from end of I not 3/4".
123	April 2000	44	Shaker Tall Clock	See Talking Back, Issue 127, October 2000, page 8, for finish we used on clock.
123	April 2000	52	Garden Shed	Build the door header assembly, step 3: "Place it in the rabbet formed by parts J and L." Bill of Materials: Part M, quantity 2; Part N, length 21 3/4".
123	April 2000	53	Garden Shed	Exploded View: Total width of roof (parts Q and S) is 30" not 30 1/2"
123	April 2000	59	Plunge-Routing Basics	Keyhole-Routing Jig: Length of router base plus 3 3/8". See Talking Back Issue 128, November 2000, page 10.
123	April 2000	62	All-Around Plunge-Router Jig	Building to dimensions given in Bill of Materials results in a jig that fits a DeWalt router. To make the jig fit any other router, modify the ends (A, B) and fence rail (G). See Talking Back November 2000, page 8.
124	June 2000	16	Pocket-Hole Routing Jig	15° stock should be 3/4x2 5/8x9 5/8"
124	June 2000	81	Workshop Rest Stop (stool)	Buying Guide change (7/08): Chrome-plated foot-rest ring is no longer available. Exploded View illustration: brass F.H. wood screw changed to F.H. wood screw. Supplies: flathead brass wood screws to flathead wood screws.
125	August 2000	26	Mini Router Table/Rotary Tools	Carriage bolt is 5" not 4".
125	August 2000	42	Hand Plane	Step 2, Cut five pieces of 1/4"-diameter brass rod to 2 5/16" long.
125	August 2000	43	Hand Plane	Exploded View: 1/4" brass rod 2 5/16" long
125	August 2000	Pattern	Double Settee	See Issue 126, September 2000, page 10 for corrections to full-size patterns A & B.
125	August 2000	Pattern	Double Settee	Part T Full-Size Pattern mislabeled Support, is Front Seat Slat.
125	August 2000	Pattern	Double Settee	Part D Full-Size Pattern mislabeled Front Rail, is Armrest Support.
125	August 2000	72	Double Settee	Bill of Materials: Part A width is 5 1/2" not 5 5/8".
125	August 2000	73	Double Settee	Exploded View: Back of seats uses two screws per board, see page 72.
125	August 2000	78	Portable Sawmills	Super Lumbermate 2000 replaced Norwood Industries model Mark IV, 126 Sept 2000,p.8 TimberKing update, 128, November 2000, p. 11.
126	September 2000	22	In Search of the Perfect Finish	General Finishes phone number 262/786-6050
126	September 2000	50	Captivating Cupola	Buying Guide: new address G.B.C. Millwork, 8151 Easton Road, Ottsville, PA 18942, phone 610/847-8100
126	September 2000	76	Pastry Stand	Step 8: "and rout the top, then the bottom." Woodtek #819-487 bit 1/8" short, use Bosch 85467M bit.
127	October 2000	52	Segmented Bowls	Here's the rule: corner 25° should be 45°.
127	October 2000	54	Sliding Table Add-On	Delta 800/223-7278, in Canada 800/463-3582
127	October 2000	57	Sliding Table Add-On	Buying Guide source is no longer available. No other sources available.
127	October 2000	67	Box-Joint Jig	Exploded View and Step 4: "Make progressively deeper cuts until the cut in the assembly is 1" deep."
128	November 2000	68	Tablesaws	Jet's fence-face material is made of high-density polyethylene (HDPE)
128	November 2000	68	Tablesaws	Delta changed the model number of the 36-475 to model 36-477
128	November 2000	81	Empire State Express	Buying Guide, Hardware Kit is no longer available, no other source
129	December 2000	18	Router-Bit Review	Step 3: "upper" cutting edge of the bit not "lower."
129	December 2000	96	Bandsaw Fence	3/8" all-thread rod 1" longer than A not 26 3/8" long
131	March 2001	53	Federal Bookcase	Exploded View: spline is 36 7/8" long not 37 3/8". Delete "5/16" from top edge" for groove on part E.
131	March 2001	55	Federal Bookcase	Buying Guide items no longer available from Constantine's. Shelf standards and supports are available at home centers. Finial available from Van Dyke's Restorers 800/558-1234, item no. AL-200123.
131	March 2001	64	Our country in quarters	Pattern: 1 inch hole should be 1/16 inch deep
131	March 2001	64	Our country in quarters	See issue 184, page 10, and 185, page 7, for additional pattern for District of Columbia and five US. Territories or http://www.woodmagazine.com/woodworking-tips/editorial-extras/ Brass plaque updated April 2010: cost is $7
131	March 2001	67	Our country in quarters	Buying Guide, Plaque, update April 2010: brass plaque $7. Mail to WOOD Magazine Coin Map, 1716 Locust Street, LS221, Des Moines, IA 50309-3023.
131	March 2001	77	Stylish Storage	Buying Guide: new address Constantines Wood Center, 954/561-1716 www.constantines.com
131	March 2001	77	Stylish Storage	Buying Guide: new address Constantines Wood Center, 954/561-1716 www.constantines.com
132	April 2001	63	Built-In Bookcase	Buying Guide: these Mission-style hinges are no longer manufactured - no other source found
132	April 2001	63	Built-In Bookcase	Buying Guide: low-profile halogen lights new item no. 39739.
132	April 2001	86	Desert Dust Bin	Pattern correction: see Talking Back, issue 134, August 2001, page 12. New pattern for cactus and row of lacing holes along one edge.
133	June 2001	16	Tool Buyers' Update	Update: Craftsman 21713 depth-stop turret six different thicknesses (add 1/8")
133	June 2001	42	Garden Footbridge	Rail: use 1 1/4" deck screws not 1 5/8" deck screws
133	June 2001	43	Garden Footbridge	Step 5: change 1 5/8" deck screws to 1 1/4" deck screws
133	June 2001	43	Garden Footbridge	Rail Holes: need 9 upright holes not 8. Correct hole measurements are 6 13/16" from centerline, 4 1/4" on center. Only end mounts (I) need the 15° bevel. See Talking Back, issue 141, April 2002, page 10.
133	June 2001	51	Racheting Candlestand	Base drawing: Location of uprights F not B
133	June 2001	52	Racheting Candlestand	Photo A is the wrong photo, caption is correct
133	June 2001	pattern	Racheting Candlestand	Upper Bolster: 9/16" along edge should be 5/8"
133	June 2001	61	Fishing Net	Note: Count the number of loops on net bag and adjust the number and location of the loops holes. Supplier has no control over this situation. (see issue 140 page 10)
133	June 2001	74	Side-Draft Workbench	Part QQ inside 3/4" rabbet 3/8" deep; outside 3/8" rabbet 3/8" deep
133	June 2001	76	Side-Draft Workbench	(see Talking Back 139, p. 14) Parts View: Part H switch cut out should be on other side; Part I 6 1/4" should be 6 3/4"; Part JJ clarification: optional 13/16" grooves 7/16" deep in top layer only
133	June 2001	77	Side-Draft Workbench	Parts View: Part A, flip the drawing; Part E no cut out and center dado
133	June 2001	85	Two fast fixes for dust collection woes	Bag part number changed to 145764
134	August 2001	14	Great Ideas: Fail-Safe Router Jig	Clarity in setup instruction to get an exact-width dado: "then slip a scrap of shelf stock between the fixed and movable fences. Turn the wing nuts to snug the movable fence against the stock, and clamp it in place. Remove the scrap." Illustration: 1/4" washer should be 1/4" wing nut.
134	August 2001	40	Patio Party Center	Drawing 5b Leaf Support: 8 1/4" and cutout moved to 9" width side of PP (see issue 139 p.10)
134	August 2001	57	Patina-Topped Jewelry Box	Buying Guide: cork, feet, and hinges are no longer available. No other source available.
135	September 2001	8	Talking Back	Update on Douglas fir: Textbook of Wood Technology states 38 pounds per cubic foot
135	September 2001	38	Sleigh Bed	Bill of Materials and Exploded View: Part H length is 60 1/2" not 61 3/8".
135	September 2001	38	Sleigh Bed	Cutting Diagram: D and E from 9 1/4" board not 7 1/4"
135	September 2001	38	Sleigh Bed	Clarification: no round-over on inside face where F intersects D and F intersects E.
135	September 2001	38	Sleigh Bed	Bill of Materials: part F, 1 3/8" thick
135	September 2001	38	Sleigh Bed	Parts D and E are initially cut oversize, D is 8 1/8 and E is 7 3/8
135	September 2001	38	Sleigh Bed	Vertical Raised-Panel Bit source: Infinity Cutting Tools, item 90-602, call 877-872-2487
135	September 2001	39	Sleigh Bed	5a Bed Rail Detail: mortise location 3/8", 5/8", 3/8" not 3/8", 5/8", 1/2"
135	September 2001	45	3-in-1 Work Support	Drawing 1 Upright: Step 1, 1/2" arrow on right side point to side of 1" groove (like on left side); Second STEP 2 should be labeled STEP 3
135	September 2001	46	3-in-1 Work Support	Hardware update: aluminum mini-track available from Rockler, rockler.com. 800-279-4441, part no. 34676
135	September 2001	58	Display Stand	Step 3: Part E should be 3 3/4" not 3 1/2" from fence (see issue 140 page 8)
135	September 2001	59	Display Stand	Illustration 4b: Part E should be 3 3/4" not 3 1/2" from edge (see issue 140 page 8)
135	September 2001	72	Storybook Lamp	Exploded View: 7/32" hole 3/8" deep in 1" wood ball not 9/32".
136	October 2001	51	Custom Cabinetmaking	VanDyke's Restorers no longer carries wood veneer tape
136	October 2001	75	Display Cabinet	Supplies: Amerock 1" knobs BP-1590 no longer available, use knob of own choice
136	October 2001	75	Display Cabinet	Buying Guide: Part no. 02S60 now 142852; available from www.woodcraft.com
136	October 2001	88	Drill Presses	Chart: Jet amps should be 9/4.5 (see issue 140 page 10)
136	October 2001	93	Nighstand	Buying Guide, drawer lock joint bits: price change to $54.99 as of September 2003
136	October 2001	93	Nighstand	Buying Guide: Jesada drawer lock bit available from Razor Tools 877/898-6657
136	October 2001	99	Products That Perform	SMartGRAIN printable veneer phone number changed to 641/533-2103
137	November 2001	38	Shop Tips	Illustration: 1/4x3/8" splines should be 1/4x5/8" splines
137	November 2001	68	A Novel Box	Change hardware buying guide: stop hinge, part no. 00D80.05, Lee Valley Tools 800-871-8158
137	November 2001	75	Armoire	Buying Guide, drawer lock joint bits: price change to $54.99 as of September 2003
137	November 2001	75	Armoire	Buying Guide, hardware: price change, no. 937-014, $2.99; no. 913-945, $6.89 as of Sept 2003
137	November 2001	90	Yuletide Container	Buying Guide: Van Dyke's Restorers discontinued dye after article printing. New Buying Guide: Woodworker's Supply, 800/645-9292, item W1790-Brilliant Scarlet
138	December 2001	44	Full-service benchtop router table	Use T-track instead of T-slotted mini tracks and mini track
138	December 2001	45	Full-service benchtop router table	Drawing 1: change mini-track to T-track; screws for T-track are #6x1/2 inch F.H. wood screws;change Round-knob to 3/4 inch stud not 1/2 inch stud
138	December 2001	46	Full-service benchtop router table	Step 5: change mini-track to T-track
138	December 2001	46	Full-service benchtop router table	Supplies: move 1/4 inch hexhead bolts from Buying Guide to Supplies list; add #6x1/2 inch F.H. wood screws
138	December 2001	46	Full-service benchtop router table	Updated Buying Guide: Hardware. Knobs with 1/4 inch threaded inserts no. 27R14 (8); round knobs no. 27R11 (4), acrylic insert plate no. 16L71 (1). Woodcraft, 800-225-1153. 36" T-track no. 12K79.24 (1); 24" T-track no. 12K79.22 (2); 2-1/2" vac port no. 03J61.10 (1). Lee Valley, 800-871-8158. Switch: Safety power switch no. 20915. Rockler, 800-279-4441.
138	December 2001	48	Full-service benchtop router table	Drawing 3: change mini-track to T-track; step 3 change mini-track to T-track
138	December 2001	49	Full-service benchtop router table	Step 2: change mini-track to T-track; Step 4 "See Buying Guide for our source of knobs."
138	December 2001	69	Arch-Topped Cabinet Clock	Buying Guide correct part no.: Brass knobs no. 39500, $1.25 each; correct phone # Klockit 800/556-2548 (see issue 141 page 10)
138	December 2001	69	Arch-Topped Cabinet Clock	Step 1: 3 1/4"-diameter hole for clock movement not 3 1/8"
138	December 2001	70	Arch-Topped Cabinet Clock	4 Front drawing: 3 1/4"-dia. Hole not 3 1/8"
138	December 2001	Pattern	Tabletop Reindeer	Narrow Leg made out of 1/8" stock not 1/2" stock; wedge 3/8" stock
138	December 2001	79	Eight-drawer dresser	Buying Guide, drawer lock joint bits: price change to $54.99 as of September 2003
138	December 2001	79	Eight-drawer dresser	Buying Guide: Jesada bits available from Razor Tools 877/898-6657
138	December 2001	82	Suite Reflections (mirror)	Buying Guide: Change call Jesada to call Razor Tools at 877/898-6657
139	February 2002	41	Futon	Buying Guide price change: part no. 953-817 $10.99 as of September 2003
139	February 2002	44	Eye-Catching Coasters	See modified corner-cutting jig in issue 143, September 2002, page 8.
139	February 2002	51	Space-Saving Work Center	Supplies: Change source for optional Quick-Vise to Irwin Industrial Tools, same phone number (vise model changed from one in photo)
140	March 2002	58	Desk	Illustration 5a: 4 1/2" should be 5 1/4" for magnetic catch
140	March 2002	60	Desk Organizer	Materials List: part C length is 5" not 4 1/2"
140	March 2002	79	Retro TV Desk Clock	Exploded View, Part A: 2 3/8" hole 3/4" deep
140	March 2002	95	Showtime Storage	Side Panel Full-Size Detail Pattern: 1/2" rabbet 1/4" deep on inside face not ouside face
141	April 2002	49	Stand that delivers (media stand)	Buying Guide, new address: Glass & Mirror Craft Industries, Inc., 48230 West Road, Wixom, MI 48393
141	April 2002	65	Pergola	Cutting Diagram: notches for end girders (H) go on top not bottom, see drawing 3
142	June/July 2002	22	Shop Tips	Telephone number Goldblat 800/782-6539
142	June/July 2002	22	Shop Tips	Telephone number Goldblat 800/782-6539
142	June/July 2002	61	Grand entrance (gate)	Drawing 6 and Step 4, Part R: Lay part R diagonally across the assembly with the top end opposite the hinge side.
142	June/July 2002	63	Grand entrance (gate)	Buying Guide: HardieSingle Individual Shingles, web site www.jameshardie.com
143	September 2002	50	Lazy-days chaise	Buying Guide, Cushion: Manufacturer is out of business. Cushions are available at local seasonal furniture stores.
143	September 2002	59	Knockdown Cabinet System	Double Base and Top Cutting Diagram: top and second board changed to top board: move J's to second board second board: 2 needed, remove one set of H's and add two J's from top board
143	September 2002	59	Knockdown Cabinet System	Double Base and Top Cutting Diagram: top and second board changed to top board: move J's to second board second board: 2 needed, remove one set of H's and add two J's from top board
143	September 2002	59	Knockdown Cabinet System	Double Base and Top Cutting Diagram: top and second board changed to top board: move J's to second board second board: 2 needed, remove one set of H's and add two J's from top board
143	September 2002	60	Knockdown Cabinet System	Materials List: I's and J should be quantity 4 Single Base and Top Cutting Diagram: board with I's and J's, 2 are needed
144	October 2002	18	Salt & Pepper Shakers	Buying Guide: the bungs listed are item #123-0148, $.99 each (see issue 147 page 11)
145	November 2002	70	Pendulum Cradle	The 3/4" dowels that the cradle swings on are correctly sized at 1 1/4" long. These dowels are glued into the ends (A) in Step 1 under "Assemble the cradle" on page 72. The 1 1/2"-long dowels specified in Step 8 on page 73 are used temporarily to align the spacers (D) with the supports (E) during glue-up. The extra 1/4" allows you to pull the dowels back out of the hole after the glue dries.
146	December 2002	64	Oil-candle trio	Buying Guide: Teardrop oil candles have been pulled from the market for safety concerns, item no longer available.
146	December 2002	74	Two-In-One Arts & Crafts Chair	Rocker Form, drawing 7, middle-dimension should be 7 7/8" not 8 1/2"
147	March 2003	51	Baker's Trio	Step 4 and bottom photo caption: 1/8" BIRCH dowel not walnut (see 149 page 6)
147	March 2003	56	Baker's Trio	Supplies: 1/8" BIRCH dowel not walnut
147	March 2003	78	Country Furniture in the making	Web site address is http://woodstore.woodmall.com/counfur.html
147	March 2003	86	Resawing	Page reference to page 87 should be to page 84
148	May 2003	cover	Dovetail Secrets heading	on page 86 and 90
148	May 2003	29	Shop Tip A press for gluing stacked bowl blanks	The compression nut (veneer-press screw) should be below the bridge
148	May 2003	31	Shop Tip: Rout parallel slots to perfection	Illustration: Switch labels Dovetail slots with Slots precut with 5/16" straight bit
148	May 2003	44	Onlay Accents Made Easy	Photo labels missing. Top photo C, bottom left A, bottom right B.
148	May 2003	62	Arts & Crafts Table Lamp	Lamp kit price $54.95 plus shipping; Lumber kit no longer available.
148	May 2003	66-67	Candle Laterns	Glass dimension should be 3 9/16" wide not 3 11/16" wide (referenced in Note, Exploded View, and Supplies) (see issue 151 page 6)
148	May 2003	73	10 Portable Planers	Chart Note #5: page xx should be page 71
148	May 2003	96	Patio-Perfect Planter	Materials List: Part A width is 17 1/8 and length is 16 3/8"
149	June/July 2003	55	Bandsaw table system	Buying Guide Kits are no longer available (March 2008)
149	June/July 2003	65	Accessories for Bandsaw	Tapering Jig: 3/4" counterbore 1/4" deep not 1/2" counterbore
149	June/July 2003	66	Accessories for Bandsaw	Buying Guide Kits are no longer available (March 2008)
149	June/July 2003	79	Adirondack Chair & Footrest	Materials List: part M width is 2 1/2" not 2 5/16" (6 slats not 7 as shown in photo p. 74) (see issue 152 page 6)
150	September 2003	55	Occasional table	Scrapwood router trammel: Reverse arrow on routing direction towards top of the circle
150	September 2003	86	Pizza Peel	See issue 152 page 6 for full-size handle end pattern

Continued on page 4: Issues 151 to current

Free Year + Free Gift! Order NOW and get 1 FREE YEAR of Wood® Magazine! PLUS you'll get our Great Projects for Your Shop guide instantly! That's 2 full years (14 issues) for the 1-year-rate – just $28.00. This is a limited-time offer, so HURRY! (U.S. orders only) (Click here for Canadian orders)

First Name:

Last Name:

Address:

City:

State:

Zip Code:

Email Address:

100% Money-Back Guarantee: You must be pleased, or you may cancel any time during the life of your subscription and receive a refund on any unserved issues – no questions asked. Wood® Magazine is currently published 7 times annually – subject to change without notice. Double issues may be published, which count as 2 issues. Applicable sales tax will be added. E-mail address required to access your account and member benefits online. We will not share your e-mail address with anyone. Click here to view our privacy policy.

Comments (18)

kathleensmit wrote:

Issue 219 - July 2013 Raised-panel-bit boxes. Pages 54 and 55 are not complete. Need to be reprinted.

5/23/2013 05:05:03 PM Report Abuse

swallace19431 wrote:

Issue # 218 (May 2013). In the text, para.2, you say, position the rip fence 31/4 inch from the dado blade. However in the illistration, pg. 47 it shows the dado 3 inches in from the end of the board. Which is correct?

5/14/2013 04:42:37 PM Report Abuse

charles hachat wrote:

issue 215 dump truck,location of wheel holes can't be correct.rear dual wheel hole 1 5/8 and 2 1/8 too close.approximately 3 3/4 from end on second hole.

5/8/2013 02:04:25 PM Report Abuse

dickcottrell47 wrote:

I have a June of 1994 Wood Magazine that has an article on 44 regarding building a solar "Kiln" The article offers plans and material list to build the kiln for $9.95. I sent a check and request for plans and material list to the address at wood magazine and my letter came back "undeliverable". Who do I send this to.....? to get a set of plans and material list? dick cottrell

4/3/2013 10:58:24 AM Report Abuse

jerry h. wrote:

Iss. 218,page43,drawing 2,should the rabbets be 1/4/in instead of 3/8?

3/16/2013 09:17:50 PM Report Abuse

Cyberwil2 wrote:

Looking a the Dec/Jan 2012/2013 issue and on page 18 is a Dead-on accurate Shelf-pin jig. The story says to use the drawing at the right to build the jig. No drawing.

2/18/2013 07:59:32 PM Report Abuse

drury.william wrote:

i am looking april 1989 issue page 70 issue 28 it's a acorn bird

12/18/2012 09:56:31 AM Report Abuse

rgross241 wrote:

In Issue 208 the material list does not list part "A" nor any sizes for this part

11/25/2012 02:37:07 PM Report Abuse

bob_trowbridge wrote:

Issue 209 - Box Joint jig I am new a routing. My router will only extend above the table 15/16", with a 1/4" mounting plate. If I use a 3/4" bedplate on the jig, the bit will only extend 3/16" above the plate. I have a 5/16" dia. bit, so the extension needs to be 5/16". Are there longer bits available? Or does my Craftsman router have too short a travel? I am into woodworking on a shoestring budget.

10/21/2012 10:27:20 AM Report Abuse

grzendafarm1 wrote:

Nov 2012 issue: On Page 62, the web site for the hardware kit is correct but they do not offer that kit. Any suggestions as to another site?

10/16/2012 07:40:12 AM Report Abuse

MadMaxH3 wrote:

In issue #213 on page 60 for the "Tic-Tac-Toe Game Set", should the dimensions for "Part D - top/bottom panels" be : 1/4"x 4-5/8"x4-5/8" ?

8/8/2012 07:15:40 PM Report Abuse

sshanman wrote:

I am currently working on the Playtime Express found in Issue #14, page #74 and have a question regarding part "U" the top of the passenger car. The plan calls out a 1/2" beading bit. The part is listed as 1/2" stock. This bit is too large to leave a reveal top and bottom as shown in the photo. Is it supposed to be a 3/8" or 5/16" bit?. If you center a 3/8" bit the piece wants to crawl under the bearing. Thank you, Sam Shanman. samuelshanman824@gmail.com

4/21/2012 08:50:36 PM Report Abuse

vernshomes2 wrote:

In issue #209 dec/jan 2011/2012 The carousel music box I made but unite was to unstable that I put a ring lazy suzan in it and made a world of difference on how it looks and works Vernon Johnson Clearwater MN 55320 612 202 5708 VernsHomes@ gmail.com

2/18/2012 12:38:01 PM Report Abuse

lgreen512 wrote:

Thanks for a great project this month(Mar 12)and thanks for the update, but I think there is another misprint. Part "F" how far up or down due you drill the holes(3/8")from the end. You say find the center point and drill 3/8" holes even on the drawinds you do not have the measerments like everything else. Your help is needed-----Thanks

2/16/2012 10:57:13 PM Report Abuse

greyowl8 wrote:

I�ve subscribed to Wood magazine almost from the beginning. How about posting these changes / updates in a downloadable searchable PDF, excel or some such file.

1/1/2012 02:20:39 PM Report Abuse

Rich J. wrote:

I would like to build the crownless shelf from issue197 May/ June 2010, but I am having no luck finding the plyood cap moulding in oak. Anyone have a thought where I might be able to locate this.

7/24/2011 09:49:15 AM Report Abuse

steel_dragon67 wrote:

@ronnmeg you can find assorted candies at your local Cracker Barrel or you can go to Gumball.com hope this helps

1/25/2011 06:59:41 PM Report Abuse

m_saffel wrote:

issue 202 gumball machine, I found that if you put round hard candy instead of gumballs works just as well.

12/29/2010 02:24:06 PM Report Abuse