SPECIAL OFFER: - Limited Time Only!
(The ad below will not display on your printed page)

Wood Magazine

Workbench serves as tablesaw outfeed, too

 

Boards on bench with drill bit on top board
Easy drill-press mortises

To create the mortises where marked on Slide 2 on each laminated upright, I bored within the marked perimeter lines with a Forstner bit, using a back block to prevent chip-out. After hogging out most of the material with the flat bottomed bit, I used jigsaw and a 1" chisel to finish forming the through mortises.

shim

Wood Magazine