Saw-Blade Selector
SPECIAL OFFER: - Limited Time Only!
(The ad below will not display on your printed page)

Wood Magazine

Saw-Blade Selector

Slotted holder keeps your blades in sight and ready.

Saw-Blade Selector

Saw-Blade Selector

Wall-mount this handy holder near the stationary saws in your shop, or, if you like, place it on a convenient benchtop. You ll find it the ideal storage project for organizing an assortment of saw blades and a dado-blade set.

To make the notches, cut the side pieces to shape, and mark the notch locations. Then, mount a 1/4" dado blade to your tablesaw, tilt the blade 45° from center, and using your miter gauge with an attached auxiliary wood fence for support, make the cuts.


389_1_2

If you like this project, please check out more than 1,000 shop-proven paper and downloadable woodworking project plans in the WOOD Store.


 

shim

Wood Magazine