Tablesaw Sanding Table
SPECIAL OFFER: - Limited Time Only!
(The ad below will not display on your printed page)

Free Year + Free Gift! Order NOW and get 1 FREE YEAR of Wood® Magazine! PLUS you'll get our Great Projects for Your Shop guide instantly! That's 2 full years (14 issues) for the 1-year-rate – just $28.00. This is a limited-time offer, so HURRY!
(U.S. orders only) (Click here for Canadian orders)

Email:

First Name:

Last Name:

Address:

City:

State:

Zip:

100% Money-Back Guarantee: You must be pleased, or you may cancel any time during the life of your subscription and receive a refund on any unserved issues – no questions asked. Wood® Magazine is currently published 7 times annually – subject to change without notice. Double issues may be published, which count as 2 issues. Applicable sales tax will be added. E-mail address required to access your account and member benefits online. We will not share your e-mail address with anyone. Click here to view our privacy policy.
Wood Magazine

Tablesaw Sanding Table

A built-in dust chute links it directly to your shop vacuum or dust collector. We designed this sanding table to fit a 10" JET Contractor's Saw.

Illustration
271_1_1

Illustration

We designed this sanding table to fit a 10" Jet Contractor's Saw. You'll probably have to alter the table's size to fit your particular saw. Dust catchers such as ours aren't meant to replace dust-collection devices you're already using. This one is a site-specific accessory that helps you manage the fine dust that results from using a handheld pad sander. Note also the handy built-in tool tray for storing sanding blocks, pushsticks, and other workshop items.


Build the table as shown in the Exploded View below to fit your particular saw. We used a piece of perforated hardboard to mark the numerous hole locations. Drill the holes and then countersink them slightly. Use a piece of duct out the back of the unit to fit your dust-collection system or shop vacuum.


sandtable

 

Bill of Materials

Bill of Materials

Bill of Materials
Part Finished Size Mat'l. Qty.
T W L
SANDING TABLE
A tabletop 3/4" 24" 27-1/8" MF 1
B spacers 3/4" 2-3/16" 25-5/8" H 4
C end caps 3/4" 2-3/16" 24" H 2
D bottom 1/4" 15-1/2" 27-1/8" HB 1
E screen molding 3/16" 3/4" 25-5/8" H 2
F screen molding 3/16" 3/4" 8-1/2" H 2
DUST CHUTE
G sides 3/4" 5" 25-1/2" H 2
H end cap 3/4" 5" 5" H 1
I bottom 1/4" 6-1/2" 26" HB 1

Materials Key: MF-medium density fiberboard, H-hardwood (maple or birch), HB-hardboard.

Supplies: #8x1" flathead wood screws, #8x1-1/2" flathead wood screws, 1/2" hardware cloth, plastic laminate, #6x3/4" panhead sheet-metal screws, 4" round duct 5" long, #17x1" wire nails.


If you like this project, please check out our 230+ paper and downloadable woodworking project plans at the WOOD Store.


If you like shop and furniture projects, click below for information on subscribing to WOODŽ magazine.


 

shim

Wood Magazine