On-the-mark circ-saw jig
SPECIAL OFFER: - Limited Time Only!
(The ad below will not display on your printed page)

Wood Magazine

On-the-mark circ-saw jig

Try your hand with a jig that delivers accuracy for left- or right-bladed saws.

This circ-saw fence helps me cut squarely and precisely to a mark. The sliding jaw locks in place with a thumbscrew, keeping it snug against the workpiece.

The jig shown is for my left-bladed saw, and the 1 1/2" width to the right of the fence represents the distance from the edge of the saw base to the blade. On right-bladed saws, this dimension will be longer. To get a precise zero-clearance edge, leave 2" or more of stock to trim with your saw after assembly.

After that, to make a dead-on cut, simply align the end of the T-square head with the marked cutline, close and secure the sliding jaw against the workpiece, and run your saw's baseplate along the fence.

— Chris Boenig, Clarksville, Tenn.

If you like this project, please check out more than 1,000 shop-proven paper and downloadable woodworking project plans in the WOOD Store.


 

shim

Wood Magazine