Snap a sharp line in glass
SPECIAL OFFER: - Limited Time Only!
(The ad below will not display on your printed page)

Wood Magazine

Snap a sharp line in glass

Glass-breaking jig saves trips to the glass store.

Having four daughters and three grandchildren, I am forever making picture frames. Usually these frames are not a common size, so I started to cut my own glass with mixed results. Finally, I made the glass-breaking jig shown to provide uniform pressure for a clean break. On one of the plywood layers, I glued a 1/16x1" scrap of plastic countertop laminate.

To use the jig, clamp it over the glass sheet, leaving just enough room for the glass cutter. After scoring, reclamp it next to the score line, and snap off the extra glass.

-- Karl Mueller, Fairport, N.Y.


 

shim

Wood Magazine