Resawing without a bandsaw
SPECIAL OFFER: - Limited Time Only!
(The ad below will not display on your printed page)

Wood Magazine

Resawing without a bandsaw

With a little work at the tablesaw, you can resaw wide boards without a riser-block equipped bandsaw.

A 6"-wide board is about the limit for resawing on a 14" bandsaw without a riser block. So how do you resaw something wider if all you have is a standard bandsaw, or no bandsaw at all? Here's how to do it with your tablesaw and a little elbow grease.


Step 1

Outfit your tablesaw with a tall auxiliary fence and a zero-clearance insert with a 1/8" splitter. Position the fence to center the board on the blade.


Step 2

Working alternately from both edges, make a series of shallow cuts, progressively raising the blade until reaching the maximum cutting depth of the saw.


Step 3

Insert a 1/8" spacer in one saw kerf, and clamp the board in your bench vise. Use a handsaw to cut through the web between the kerfs cut with the tablesaw.


If you like this project, please check out more than 1,000 shop-proven paper and downloadable woodworking project plans in the WOOD Store.


 

shim

Wood Magazine