Pivoting outfeed table
SPECIAL OFFER: - Limited Time Only!
(The ad below will not display on your printed page)

Wood Magazine

Pivoting outfeed table

Having a roller stand in the shop is almost like having another person around to help you work with long and cumbersome material, but roller stands also have a frustrating flaw: If the material is warped or droopy, you'll probably knock over the stand before you get help from it. The tilting plywood platform, shown at right, virtually eliminates this problem.

To use it with your tablesaw, set the level platform height to match your tablesaw top, and then tilt the platform toward the saw. When you feed the board through, it catches the platform and levels it out, and the roller stand will remain standing.

- J. D. Stanley, Cleveland Heights, Ohio


 

shim

Wood Magazine