Pages in this Story:
Any exceptions and tips pertaining to this issue's featured wood species-appear under headings elsewhere on this page.
- For stability in use, always work wood with a maximum moisture content of 8 percent.
- Feed straight-grained wood into planer knives at a 90° angle. To avoid tearing, feed wood with figured or twisted grain at a slight angle (about 15°), and take shallow cuts of about 1/32".
- For clean cuts, rip with a rip-profile blade that has 24-32 teeth. Smooth cross-cutting requires at least a 40-tooth blade.
- Avoid drilling with twist drills. They tend to wander and cause breakout. Use a backing board under the workpiece.
- Drill pilot holes for screws.
- Carving hardwoods generally means shallow gouge bevels-15° to 20°-and shallow cuts.
Add your comment
Please confirm your comment by answering the question below and clicking "Submit Comment."