Pages in this Story:
Any exceptions-and special tips pertaining to this issue's featured wood species-appear under other headings on this page.
- For stability in use, always work wood with a maximum moisture content of 8 percent.
- Feed straight-grained wood into planer knives at a 90° angle. To avoid tearing, feed figured or twisted grain at a slight angle (about 15°), and take shallow cuts of about 1/32".
- For clean cuts, rip with a rip-profile blade with 24-32 teeth. Smooth crosscutting requires at least a 40-tooth.
- Avoid using twist drills. They tend to wander off in the wood and cause breakout. Use a backing board under the workpiece to reduce tearout.
- Drill pilot holes for screws.
- Rout with sharp, preferably carbide-tipped, bits and take shallow passes to avoid burning.
- Carving hardwoods means fairly shallow gouge bevels-15° to 20°-and shallow cuts.
Add your comment
Please confirm your comment by answering the question below and clicking "Submit Comment."