The shelf-maker's guide

Adopt a budget-minded approach to your storage problems by designing and building your own shelving.

Submitted by WOOD community member WOOD Magazine StaffSubmit a Shop Guide
  • Guide to shelving

    Create a permanent solution to clutter by building and installing shelves to keep things picked up and stored in an orderly fashion. Basic shelf units are fairly easy to build. Here are a few pointers to help you along the way.

  • Melamine-coated particleboard

    Even with an edge, this common shelving material developed a noticeable sag at 36". A 4x8' sheet costs about $35 at our home center.

  • Particleboard

    With a solid-wood edge added, this inexpensive material ($19.50 per sheet) can handle medium loads in a garage or workshop.

  • Particleboard with plastic laminate

    A layer of plastic laminate (about $2 per square foot) on each face adds a surprising amount of strength to particleboard.

  • Oriented-strand board (OSB)

    When you make rough shelving, note that medium-cost OSB ($12 per 4x8' sheet) offers more strength than particleboard.

  • Medium-density fiberboard (MDF)

    MDF is comparable to the other manufactured sheet goods in strength but has a smooth surface. Our 4x8' sheet cost about $32.50.

  • Oak-veneer plywood

    With an edge, this choice gives you furniturelike appearance along with visually acceptable deflection up to 36". It's expensive, at $45 per 4x8' sheet.

  • Baltic birch plywood

    This is the winner of our strength test. However, its face has a bland appearance in comparison with solid wood, and we paid a hefty $70 for a 4x8' sheet.

  • Solid oak

    There's no need for edging unless you build shelves in the 48" range. But it's expensive: $3.75 per board foot at our home center.

  • Solid pine

    With an edge, it performs as well as oak, and we paid $4.29 per board foot (select grade).

Read more about

Tip of the Day

Drill Evenly Spaced Holes with Speed and Accuracy

Drill Evenly Spaced

Sometimes you need to drill evenly spaced holes. If you have a ruler at least half as long as your... read more