Home > Community > Blogs > After Hours with the WOOD Gang
Better Blog

tool

DeWalt launches brushless-motor impact driver and other tools

Stressing its commitment to innovation and system expansion, DeWalt announced this week the launch of more than a dozen cordless and corded tools as well as some accessories. Topping the list is a new impact driver in the 20-Volt Max line, but this one sports DeWalt’s first brushless motor. It will be on the market in April, selling for $279 with 1.5-amp-hour battery packs and $349 for 3-Ah packs.

This new impact driver comes out less than a year after DeWalt debuted the 20V Max line—which included an impact driver and several drill/drivers—featuring standard carbon-brush motors. The brushless motor powers the tool more efficiently, creating less heat and friction, and resulting in a 57% increase in battery run time compared to the 20V Max driver with carbon-brush motor. With a brushless motor, energy is transferred from the armature to the drive train electronically, whereas with the other system that energy transfers through the brushes by rubbing directly on the armature. Read more

Dremel adds new tools, new features to older tools

Sticking with what must be a company directive, Dremel is launching four new tools this year that are compact, versatile, and hold broad appeal to users of varying skills and interests. Representatives from Dremel stopped by the WOOD Magazine offices today to show us these new tools, as well as lots of new accessories to go with them.

First up is an all-new tool, a hybrid of an angle grinder, oscillating multifunction tool, and circular saw. The Saw-Max, due out in October, is a compact cutting tool that uses 3”-diameter blades embedded with abrasives (carbide, diamond, aluminum oxide) for cutting edges rather than teeth. Powered by a 6-amp motor, the Saw-Max generates 17,000 rpms. The tool has a spring-loaded shoe that’s adjustable up to a ¾”-deep maximum cut, or can be set at zero and the tool used as a plunge-cut saw for cuts where you don’t want an entry or exit. Four blades come with the standard kit for cutting wood, tile, and metal; one blade has an offset flange to allow for flush-cutting at the edge of the blade housing. (There’s no blade guard on the left side of the tool.) The kit with four blades will sell for $129. Attachments also available will be a dust-collection port, a straight-cutting guide to fit a 2×4, and a miter- and bevel-cutting guide.

Read more

More Bad Translations From Tool Companies

Here are some more bad translations about oscillating spindle sanders from a Web site. (I couldn’t make this stuff up, folks–it’s actually hard to write this poorly. I should know!)

This, regarding Jet’s JBOS5:

“JET’s fixed end in opposition to this instrument was to plan the charles herbert best spindle sander on the Read more

Translation, Please? Pretty Please??

Like it or not, we live in a global economy, and with very few exceptions, the power tools you and I use every day are made in some country where they speak a language other than English. For example, engineers in a machinery plant in China may first write the owner’s manual for a tablesaw in Chinese, then someone has to translate it into English before it gets shipped over here. The translation doesn’t always go smoothly—it’s like those people have a different word for EVERYTHING! (I’ve heard a couple of manufacturers refer to the broken English as “Chinglish.”) Read more

 
 
 
© Copyright , Meredith Corporation. All Rights Reserved | Privacy Policy | By using this site, you agree to our Terms of Service.