Switching over to the new blog system had me traipsing down memory lane a bit. And I realize that I’ve not updated you on the progress of my tablesaw mobile base. I know that you’ve been hanging on the edge of your seat with your fingernails, but just in case you don’t regularly read and re-read this series of blog posts, here’s where you can get up to speed: part 1, part 2, and part 3. I’m riffing off of a plan that can be found in the October 2003 issue (no. 151) or for purchase here.
And here’s where it’s at now:
Just a quick update on the mobile tablesaw base for those of you playing along at home. For those of you just joining us, here are part 1, and part 2. I’m riffing off of a plan that can be found in the October 2003 issue (no. 151) or for purchase here.
This weekend, I added the wing insert between the long fence rails. It rests on top of the router cabinet. I made it out of a double thickness of 3/4″ MDF, edged in poplar, then covered with some of my formica bonanza from the Habitat for Humanity ReStore.
The tablesaw base pushes onward. Next step, router cabinet. A little pre-build design work in Sketchup:
Here’s the start of my mobile tablesaw base. I’m riffing off of this design.
Started by dismantling the saw, as is my habit.