decking

Kreg hits the deck

Written on April 1, 2010 at 4:07 pm , by Craig Ruegsegger

Kreg has introduced a new method of securing deck boards to the framing without unsightly screw heads poking up from every board. The method works similar to Kreg’s pocket hole jig. The deck jig has three holes to guide the drill bit and driver: the two outside holes sit  45 degrees to the center hole.

Kreg Deck Jig

To use the jig, first place a couple of spacers (the red items in the photo below) between the deck boards to get the proper spacing. Read more