As the thermometer inched into the low fifties this last weekend, the Woodworking Shows opened its doors in Somerset, New Jersey. It’s been a particularly tough winter all across the east and the remnants of the truly unusual snow totals were still visible almost everywhere I drove. Though it may have been just a celebration of this temporary warmth, I believe that the woodworkers who packed the entryway and the aisles of our venue came to replace the memory of cold and ice with thoughts of shavings and sawdust. We have always enjoyed great attendance here and this time would be no different.
I feel that the show was a success on nearly every level. As has been the case for the last few years, there were more educational opportunities than the time to see them. The free seminars on the show floor were filled beyond seating capacity over the course of the entire three day show. The paid seminars (and we are slowly adding more of these focused classes) were becoming even better attended. And if you were here to make a tool purchase, nearly every manufacturer was represented in the sales booths. Both portable and stationary tools seemed to be everywhere.
Looking for antique woodworking tools, then Crafts Antique Tool Club of New Jersey had you covered there too. I don’t know about the food at this venue but beer sales looked to be very brisk. Again, something for everyone!
A few of the local woodworking clubs were on hand to display the work of their members and to attract potential new members. Garden State Marquetry Society taught their proven techniques and had samples on hand.
The Alderfer Lumber Company has some really nice stock including this striking Walnut crotch grain for sale.
Even some nice jewelry at the Hudson Valley Woodturning booth.
We also saw a large number of entries in the Showcase in both the adult and youth divisions.
In the Furniture Category, our winner was John Manura’s Jewelry Boxes.
The Turnings/Carvings Category had a tie for second place between Jeffrey Knichel’s Fluted Bowl and the Offset Baseball Bat from Robert Lenrow. First place went to Larry Morgan for his Maple Urn.
In the Models/Toys Category, Hans Bolliger took second for the Firetruck and first place was taken by the Drilling Rig and Tractor by Glen Peterson.
The Open Category had some interesting pieces. Third place was given to Roger Sinclair for the Gershwin Scroll Saw Picture. Gualberto Malave took second for the Bandsaw Box and the overall winner was Larry Yaskulka and his Jousting Horse.
The People’s Choice winner was Glenn Peterson’s Drilling Rig and the Educator’s Choice went to Larry Yaskulka’s Jousting Horse.
The Youth Division was a guitar makers heaven. All of the entries were school projects and they were all well crafted.
Third place was given to Craig Mitchell for the Blue/Silver Razorback Guitar. Second place turned out to be a three way tie! Justin Barbato (Orange Les Paul), Shelby South (Black/Blue SG Standard) and Ryan Fox (Sunburst Les Paul) drew equal votes for their guitars. First place was awarded to Lauren Woods for the Bass/Treble Clef Guitar. Lauren also took the People’s Choice award and the Educator’s Choice Runner up was Jarrod Gallack”s Gold/Black Warlock. The Educator’s Choice winner was Shelby South’s Black/Blue SG Standard.
All entrants were given goodies bags from the Woodworking Shows and a variety of products from the vendors. Winners took home tools from Bosch Tools and Work Sharp as well as gift cards from Lee Valley. Larry Yaskulka and his Jousting Horse will compete for overall winner following the Houston Show this March.
Somerset was quite a show. The attendees left happy and the educators and vendors exhausted. I was fortunate and could fly home on Sunday night. For those who make the show happen each week, our set up and transportation crews, they will drive to Kansas City next week only to go back across the country to Atlanta the following week. As always, the unheralded stars of the show. The Kansas City show will be February 28-March 2 at the Kemper Arena Grounds on American Royal Court. I hope that you’ll get a chance to come out and see what we’re so proud of. I’m teaching cabinet making in the WOOD Magazine booth and I promise you a lot of information during the course of each day. Come sit a spell and we’ll talk.
‘Til Then, I’ll see you on the road.
WOOD Magazine Traveling Ambassador
Categories: Woodworking Show Reports | Tags: Alderfer Lumber Company, Bosch Tools, Crafts Antique Tool Club of New Jersey, Garden State Marquetry, Hudson Valley Woodturners, Jim Heavey, The Woodworking Shows, WOOD Magazine Traveling Ambassador
This past Friday and Saturday, February 14-15, the Woodworking Shows returned to the Detroit area and opened its doors to a very nice group of attendees as eager as we were to enjoy and display our craft. Even though the Detroit show had only been put on the schedule a couple of weeks ago, the crowds we had hoped for did show up and we made good on our promise to provide something for everyone. Read more
Categories: Woodworking Show Reports | Tags: Detroit Area Woodturners, Jim Heavey, Marco Terenzi, Michigan Association of Woodturners, The Woodworking Shows, WOOD Magazine Traveling Ambassador, Woodworkers Guild of America
I’m very fortunate. I work for a great magazine and I really like what I do. This last weekend, February 7-9, I was able to escape the harsh and all but relentless cold and snow in the Chicago area for a trip South as part of my “job”. Read more
Categories: Woodworking Show Reports | Tags: Bosch Tools, Jim Heavey, Lee Valley Tools, Missouri Botanical Garden, Show Me Wooddturners, St. Louis, The Woodworking Shows, Tommy Mac, WOOD Magazine Traveling Ambassador, WorkSharp
While there were definitely passing thoughts of football this last weekend, January 30-February 2, woodworkers in Columbus took time out to visit the other big game in town, The Woodworking Shows. We’ve always enjoyed good attendance in Ohio and, as anticipated, our fans turned out in droves to be educated, equipped and inspired by our well seasoned team of vendors and seminar speakers. Read more
Categories: Woodworking Show Reports | Tags: Bosch Tools, I.G.Furniture, Jack Nicklaus Museum, Jim Heavey, Lee Valley Tools, Ohio Statehouse, The Woodworking Shows, WOOD Magazine Traveling Ambassador, Woodworkers of Central Ohio, WorkSharp
If your goal this last weekend, January 17-19, was to pack as many experiences into three days as you could, the Indiana State Fairgrounds in Indianapolis was the place to be. For me (and a huge number of other people), the highlight was definitely the Woodworking Show but there was certainly something for everyone else. It all started on route I-65 and its interpretation of the Indy 500. Straighten out that oval, add excessive speed and throw in snow and wind and you’ve got something to see. A lot of yellow and red caution flags flew nearly the entire weekend both North and Southbound. When you finally arrived at the Fairgrounds, you found the parking lot overflowing with snow and cars long before the doors of the show opened. Some great advanced planning led to the use of a few shuttle buses for those parked in the hinterland. Then, cold and pooped, you had your choice of the home show, gun show or Nirvana (AKA The Woodworking Show).
Once inside the warm Blue Ribbon Pavilion, attendees found nearly every square foot of the show floor filled with tools, woodworking supplies and educational seminars. Jet/Powermatic had a very nice display of heavy iron including bandsaws, cabinet saws, drill presses, planers and more. Lee Valley had an impressive gathering of precision planes, squares and marking devises. And for those looking for tools of the past, two different booths were there with enough hand tools to fill even the largest tool chest.
The educational seminars were packed the entire weekend with the only complaint being that even three days wasn’t sufficient to take them all in. Small groups seemed to gather around anyone demonstrating a tool or technique. Braving the cold, attendees watched a vendor milling logs in the parking lot. More to see this last weekend than you could shake a stick at.
The Project Showcase featured both youth and adult entries and, having seen the quality of their efforts, those young woodworkers could have easily competed with their more seasoned fellow entrants. The Box by Caiden Fry won first place in the Youth Open Category and the Maloof Chair by Jalen Waggoner took top honors in the Furniture Category. Jalen also was awarded the People’s Choice and Educator’s Choice in the Youth Division.
In the Adult Division, the Furniture Category had three winners. Third place went to Michael Powell’s Bar Stools, second place to the Hall Table by Zachary Peterson and the overall winner was Kelsea McDonald’s Buffet.
in the Adult Open Division, there were also three award winners. Third place was taken by an Intarsia Frog by Robert Hammond. Second place went to the Bow Saw by Patrick Meyer. The first place winner as well as the People’s Choice and Educator’s Choice winner was Bill Arnold’s Dulcimer. All the entrants received goodie bags from The Woodworking Shows and the winners received tools from Bosch Tools and Work Sharp and Lee Valley gift cards. Bill Arnold’s Dulcimer will be entered in the grand prize judging at the close of the Woodworking Show season in late March.
If you weren’t able to attend the Indy show, you missed a beauty but there is always next year. If you’re in the Columbus, Ohio area your opportunity comes January 31-February 2 at the Ohio Expo Center on East 17th. All of the shows continue to grow in size and popularity and the Columbus show is no exception. Expect to see tools, supplies, tips and techniques covering nearly every aspect of our craft. When you do attend, please try and make some time for the WOOD Magazine booth where the topic is cabinet making and questions are welcome. Seats are fairly comfortable too. Though I can’t promise a display of flawed driving, that ready to install hot tub or that rifle you’ve had your eye on every weekend, I can promise that you’ll come away from our show educated, inspired and equipped for your next woodworking project.
Til then, I’ll see you on the road.
WOOD Magazine Traveling Ambassador
Categories: Woodworking Show Reports | Tags: Aqua Coat, Bosch Tools, Carter Products, Indianapolis, Jet/Powermatic, Jim Heavey, Lee Valley Tools, The Woodworking Shows, WOOD Magazine Traveling Ambassador, Wood Mizer
The Woodworking Shows opened the 2014 winter season in Baltimore on January 2-5 at the State Fair Grounds in Timonium to one of the best attended venues in recent memory. The aisles were filled to all but overflowing for most of the three day event. Read more
Categories: Woodworking Show Reports | Tags: Annapolis Woodworkers Guild, Baltimore Area Turners, Bosch Tools, David Heim, Jim Heavey, Kathy Wise, New England Air Museum, The Woodworking Shows, The Workbench, WOOD Magazine Traveling Ambassador
This last weekend, March 22-24, marked the final show of the 2013 Woodworking Show season. I have been both looking forward to and yet regretting the trip to Atlanta because I really like this very unique city and all it has to offer but I also know that it will be our last show on the circuit until the Fall when we begin the 2013-2014 schedule. Hard as it is to admit, I’m a travel junkie.
In keeping with my somewhat normal routine, I spent my arrival day on Thursday exploring a part of the city I’m visiting and found the Atlanta History Center to be just what the doctor ordered. For over 3 hours I studied the impact of the Civil War on the city and its environs, the diverse influence of Folk art in the South as well as the contributions of Georgia on my favorite sport, Golf. A walk through the grounds led me to a Victorian Playhouse built around 1890 and also to Swan House, the 1928 mansion home of Edward and Emily Inman. And no trip would be complete without a down home Southern lunch at Mary Mac’s. All in all, a very satisfying intellectual and gastronomical experience.
The show was held north of the city of Atlanta in Duluth at the Guinnett Center. The hall was completely packed with sales booths and educational seminar areas and attendees filled the remaining available spaces completely each day. There were portable and stationary tools of almost every stripe on display as well as more educational opportunities than one could see even over a full three day attendance. There was also eye candy in the form of wood at the CAG Lumber company. The Honduran Rosewood burls were spectacular and some of the domestic and imported figured stock were just too nice to pass up. If I had driven to this show, I would have purchased to my heart’s content but all I could do was imagine some of that stock in my shop.
One of the most beautiful furniture pieces took the honor of first place at this last weekend’s Project Showcase. Kenneth Kline’s “Hepplewhite Style Table” was the clear winner for a reason. The work was flawless and the finish perfect.
Chuck Roberts entered the second place project, his “Bloodwood Baby Cradle” that was his own design. Like the table, you had to be there to see how well done these pieces were. George North submitted his “Black Leopard”. This was Intarsia at its best and he took third place for his effort. Kenneth’s table will be entered in the grand prize judging to take place in the next couple of weeks. Each of last weekend’s winners received a Bosch tool and all entrants took home a show goody bag.
It was encouraging to see that the Atlanta show added an exclamation point to success of this year’s events. A large part of the credit goes to our new Woodworking Show owner, Bryce Beermann, and his desire to grow the show in both size and stature and make it a true “must see” event. More venues and a new Fall season start are part of his plan. Kudos, too, to the educators and the excellent seminars that have really become a woodworker favorite. Many thanks to the vendors for hanging in there through thick and thin and especially our sponsors for the financial and product support. And for all that the attendees don’t see, we are very grateful to Charlene and Rita and their crew who set up, tear down and generally run everything so smoothly.
Lastly, on a more personal note, thanks to all those who stopped in the WOOD Magazine booth to listen to an old Italian go on and on about the craft he loves so much. I endure all the inconveniences of travel knowing that there will be some smiling, friendly faces waiting in those seats each day. Your enjoyment of our magazine and the person representing it are very much appreciated.
Next year’s season will be here before you know it. Keep an eye out for the announcements at thewoodworkingshows.com and Woodmagazine.com and plan to spend some time with us. We’re very proud of our show. Please come out and see why.
Stay healthy and safe and get back into your shop!
I’ll see you on the road.
WOOD Magazine Traveling Ambassador
I have to admit that the time I spent in Tampa this last weekend at the Woodworking Shows went by very quickly as did my respite from the never ending winter conditions at home. The transition from a downright beautiful 78 and sunny to a blustery 30 degree snow flurry filled day is a real shock to the system but it was all for a good cause. Read more
The Woodworking Show traveled to the Lone Star State of Texas this last weekend , March 8-11, and set up camp in Fort Worth. This was a new venue for us and quite a distance from Dallas where we have been for a number of years. Read more
Categories: Interesting Woodworkers We've Met, Woodworking Show Reports | Tags: "Coach" Andy Chidwick, Bosch Tools, Bradley McCalister, Frank Strazza, Jim Heavey, Paul Sellers, The Woodworking Shows, WOOD Magazine Traveling Ambassador
I have to admit being a big fan of minutia. Learning about the small, seemingly insignificant details of things has always appealed to me. The Woodworking Show in Columbus this last weekend, March 1-3, was the perfect place to whet my appetite for those little mind expanders. Read more