Home > Community > Blogs > After Hours with the WOOD Gang
Better Blog

Yes, I’m still working on my TV stand

Dance lessons and rehearsals (for the daughter, not me) are eating up time that I might normally spend in the shop, so progress on the TV stand is slow. A lot of the pieces have been cut to size so I’ve been finishing them as I go and that’s taking a long time. Here’s why: Each surface needs to lay flat so the finish spreads out evenly. For one of the vertical dividers, that’s three surfaces (each face, plus the narrow edge that faces forward). Each surface gets three coats. I can apply one coat a day. That’s nine days just to finish the dividers. Then I could move them out of the way and find room for a couple more pieces.

However, I’m beginning to have doubts about the brush-on poly I’m using. There was the earlier post about repairing bubbling on one of the frame and panel assemblies. Now on one of the dividers, I’ve got a couple of spots that are adverse to having any polyurethane on them. There must be some sort of oil contaminating those spots. I’m afraid it may come down to refinishing that face. Tack on another 3-4 days for that. Hopefully, the finishing will be smooth (pun intended) from here on out.

Craig




 
 
 
© Copyright 2014, Meredith Corporation. All Rights Reserved | Privacy Policy | By using this site, you agree to our Terms of Service.