How much wood would I need for waste?

When buying wood for a project, how many additional board feet should I purchase to account for cutoffs and defects?

Submitted by WOODreader2

As a starting point, add 15 percent to your bill of materials. Then consider your project design. If there are odd-shaped parts, add 5 to 10 percent to that number. Add to that another 5 to 10 percent if you’ll use sapwood-prone species, such as walnut or cherry. If you’re shopping in the lower grades of wood—No. 1 or 2 common—you’ll need to tack on an additional 30 percent to your order due to defects. That may sound like a lot, but it really makes sense when you realize that you could save up to 50 percent over Firsts and Seconds (FAS) lumber. Finally, keep in mind that the wood you see in the bin at your hardwood store today could come from a differ-ent, mismatched source tomorrow. So buy a little extra—being too obsessive about avoiding all waste could hurt the look of your project when you need to make a return trip. The ideal cutting lists that you see at the end of project plans don’t take defects into account. Mark out parts on actual boards to maximize your yield.

Answered by caroline.jones